|
Designed For:
- Medium
to heavy weight doors for on or off-highway applications
- Door
thicknesses of 1-7/8" (47.6mm) or greater
- Door
weights of 50-200 lbs. (23-91kg)
- Door
seal pressures of 50-150 lbs. (23-68kg) (suggested for
best results)
Material:
- Internal
latch components: heat treated, smooth edge stamped steel
- Case
halves: high strength steel
- Springs:
non-corrosive stainless steel springs
Finish:
- Zinc plated, yellow chromate steel components
Installation:
- Four
M6 X 1 grade 8.8-type fasteners are required (not included).
Tighten to the fastener manufacturers' recommended torque
value, however, do not exceed 120 in-lbs (13.3 N-m)
- Fastener mounting hole diameter should not exceed .281" (7.1mm)
Internal Lubrication:
- Oven-cured
dry lubricant is applied at factory on all critical moving
parts
|
|
Use
With:
Two position,
double rotor latches comply with FMVSS 206 in primary and
secondary latching positions when tested with approved TriMark
FMVSS 206 compliant striker bolts in accordance with SAE
J839.
.
. |
|
| Part Number |
Handing |
Mounting |
Actuation |
Actuation Feature |
Actuation Support |
SKU Number |
|
| 11450-16 |
Right
hand |
0.286" (7.25mm) diameter through axles |
Conventional L-shaped, non-handed, v01-0.887 X 1.872 (22.5mm X 47.5mm),
spring hole |
No
actuation feature |
Standard mount |
0500100-102-30014-01 |
 |
| 11449-16 |
Left
hand |
0.286" (7.25mm) diameter through axles |
Conventional L-shaped, non-handed, .887 X 1.872 (22.5mm X 47.5mm), spring
hold |
No
actuation feature |
Standard mount |
0500100-202-30014-01 |
|
| 16297-01 |
Left
hand |
M6
X 1.0 |
Conventional L-shaped, LH actuator, 2.000 X 1.281 X .188 (50.8mm X 32.5mm
X 4.8mm) offset, slot |
Extension spring |
Standard mount |
0500100-206-34026-21 |
|
| 16296-01 |
Right
hand |
M6
X 1.0 |
Conventional L-shaped, RH actuator, 2.000 X 1.281 X .188 (50.8mm X 32.5mm
X 4.8mm) offset, slot |
Extension spring |
Standard mount |
050010-106-33036-21 |
|
| 12181-16 |
Left
hand |
M6
X 1.0 |
Finger release-strt, Non-handed, 2.810 X 0 X .562 (71.4 X 0 X 14.3) form,
No holes |
No
actuation feature |
Standard mount |
0500100-206-50011-01 |
|
| 12180-16 |
Right
hand |
M6
X 1.0 |
Finger release-strt, Non-handed, 2.810 X 0 X .562 (71.4mm X 0 X 14.3mm)
form, No holes |
No
actuation feature |
Standard mount |
0500100-106-50011-01 |
|
| 18610-01 |
Left
hand |
M6
X 1.0 |
Conventional 2-pt., non-handed, 1.25, .625 X 1.083 (31.8mm X 15.9mm X 27.5mm),
stop |
Torsion spring |
Standard mount |
0500100-206-20010-01 |
|
| 18611-01 |
Right
hand |
M6
X 1.0 |
Conventional 2-pt., non-handed, 1.25, .625 X 1.083 (31.8mm X 15.9mm X 27.5mm),
stop |
Torsion spring |
Standard mount |
0500100-206-20010-01 |
|
|
|