070-0200 .675" Diameter Striker Bolt

Designed for use with TriMark's two-rotor latches and cage nuts

Material:

• Typical materials include AISI 4140 and AISI C10B21 steel (or equivalent), heat treated to TriMark ES-141

Finish:

• Zinc plated with yellow chromate

Installation:

• Torque 7/16-14 UNC-2A and M12 X 1.75-6g to 56 ft-lbs (74.7 N-m) minimum depending upon surface conditions
• Torque 1/2-13 UNC-2A to 85 ft-lbs (113.3 N-m) mimimum depending upon surface conditions

TriMark striker bolts are designed and tested to meet or exceed FMVSS 206 safety requirements only when used with TriMark's corresponding 206 compliant latches.

Use With:

• TriMark 050-0100 Two-Rotor Latch
  • 16297-01
  • 16296-01
  • 12181-16
  • 12180-16
  • 11450-16
  • 11449-16
  • 18610-01
  • 18611-01
• TriMark 050-0103 Two-Rotor Latch 2-Position Intertrip
  • 14498-01
  • 14499-01
  • 13686-01
  • 15276-01
• TriMark 050-0107 Two-Rotor Latch With Coaxial Trip
  • 16527-01
  • 18753-01
• TriMark 050-0110 Two-Rotor Single Position
  • 15507-01
• TriMark 050-0170 Two-Rotor Latch With Bellcrank Linkage
  • 18875-01
  • 18874-01