100-0410 Cage Nut

Designed For:

• Entrance doors and compartment doors with a 3/8"-16 or 7/16"-14 striker bolt application

Features/Benefits:

• 3/8"-16 or 7/16"-14 threads
• Up to .250" (6.4mm) total vertical and .125" (3.2mm) total door seal adjustment
• One piece assembly for simplified installation

Installation:

• Mounts with standard 6mm screws (not included)
• Striker bolt mounting close to edge to allow use in applications where striker bolt is close to the frame edge

Use With:

• TriMark 030-0175 Stamped Steel Compartment Latch
  • 16268-13
• TriMark 030-1300 D-Paddle Handle
  • 14996-03
  • 14817-01
• TriMark 050-0107 Two-Rotor Latch With Coaxial Trip
  • 11920-16
  • 11920-16
• TriMark 050-0200 Slimline Rotary Latch
  • 11664-16
  • 11665-16
• TriMark 050-0204 Slimline Latch With Inline Trip Lever
  • 13844-02
  • 13845-02
• TriMark 050-0210 Slimline rotary Latch Single Position
  • 14953-02
  • 14952-02
• TriMark 050-0300 Single Rotor Latch
  • 14382-01
• TriMark 070-0100 .500" Diameter Striker Bolt
  • 81687-16
  • 10335-16
• TriMark 070-0400 12mm Strike Bolt
  • 16904-01

Steel nut withstands tensile loads applied to striker bolt in excess of 2500 lbs. as required by FMVSS 206.

Together the cage nut and striker bolt meets or exceeds FMVSS 206 load requirements.