060-1650 Motor Home Entrance Door Hardware

Designed for RV motor homes and fifth wheel trailer entrance doors, this product has been upgraded with a steel plunger for better security and long life. It features easy installation with through sandwich mounting, a low-profile plunger style latch which is compliant to FMVSS 206, a built-in deadbolt for additional security and is power lockable.

 


Designed For

  • Motor home entrance doors with thickness ranging from 1.39" (35.3mm) to 1.78" (45.2mm)
  • Different inside handle assemblies are required to facilitate the range of door thicknesses. Please identify when inquiring
  • Fifth-wheel trailers, pull-type trailers, and slide-in campers
  • Door requiring resistance to water and dirt infiltration
  • Universal application - can be used in either right or left-hand doors


Features/Benefits

  • Inside release is low profile (.940") (23.9mm) to allow for close-fitting screen doors
  • Paddle can be locked before door is shut
  • Paddle is rigid when locked
  • Comfortable finger access
  • Inside assist with open bail for easy closing
  • Can be keyed to match other TriMark door products with KeyOne Plus for a single-key system, keyed alike or provided non-locking
  • Built-in deadbolt eliminates the need for add-on residential type deadbolt (deadbolt option)
  • Deadbolt locks into the fully extended position for true deadbolt functioning (deadbolt option)
  • Ability to be used with power actuation for locking
  • Deadbolt cylinder non-removable when locked for added security
  • Two different lengths of load pins are available, pre-assembled

Available

  • With optional built-in deadbolt
  • Master keyed paddle key cylinder and non-master keyed deadbolt key cylinder
  • Without key cylinders for matching entire vehicle cylinders after installation

 

Material

  • Housing, inside plates, handles, deadbolt, locking components including lock knobs: Die cast zinc alloy
  • Strike plate: Heat treated and zinc plated steel
  • Plunger load pins and plunger end plates: Steel

Finish

  • Black powder coated
  • Copper-nickel-chrome plated
  • Other finishes available upon request

Installation

  • #10-24 UNC mounting screws (not included). Recommended torque 10 in/lbs (1.1 N-m)
  • 1/4-20 UNC grade 5-type fasteners for strike plate installation recommended
  • Supplied with gaskets already installed
  • Sandwich mount installation does not require any linkage rods
  • Power actuators, power actuation mounting brackets and rods are available for optional power actuation of locks. Please inquire.

U.S. Patent No. 8,733,139

U.S. Design Patent No. D674,678 / D676,304

Applications of this system may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified within the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this system meets FMVSS 206 (ECE R11) loads and locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

Please specify search criteria:


CompareCatalog NumberTriMark NumberDescriptionHandingFinishKey CodeDeadbolt Key CodePlungerLoad Pin LengthDoor ThicknessDeadboltScrewsStatus CodeSample RequestCAD Drawing
0601625-23037-000000000-000000000-0010 No Label31075-01 Inside Release Non-Handed Low Gloss Black N/A N/A N/A N/A 1.39 (35.3mm) - 1.58 (40.1mm) No Deadbolt A/A
0601625-23037-000000000-000000000-001131073-01 Inside Release Non-Handed Low Gloss Black N/A N/A N/A N/A 1.39 (35.3mm) - 1.58 (40.1mm) Deadbolt NoA/A
0601625-23037-000000000-000000000-0011 FMVSS Label31073-02 Inside Release Non-Handed Low Gloss Black N/A N/A N/A N/A 1.39 (35.3mm) - 1.58 (40.1mm) Deadbolt NoA/A
0601625-23037-000000000-000000000-0011 FMVSS Label Red Knobs31073-05 Inside Release Non-Handed Low Gloss Black N/A N/A N/A N/A 1.39 (35.3mm) - 1.58 (40.1mm) Deadbolt NoA/A
0601625-23037-000000000-000000000-0021 FMVSS Label, Red Knobs31074-03 Inside Release Non-Handed Low Gloss Black N/A N/A N/A N/A 1.58 (40.1mm) - 1.78 (45.2mm) Deadbolt A/A
0601650-13037-700000000-742141-2240230-1201029412-10 Exterior Paddle Non-Handed Low Gloss Black KeyOne Plus provision - no lock installed KeyOne Plus, Non-master keyed/keyed random, 2141-2240, 2 keys on ring, Large Rectangular Head Overmolded Key, Black Key head, TriMark logo Zinc Short All Thicknesses Deadbolt NoA/A
0601650-13037-711160000-711160000-1201129412-11 Exterior Paddle Non-Handed Low Gloss Black KeyOne Plus, Master keyed/keyed alike, 1160, 0 keys KeyOne Plus, Master keyed/keyed alike, 1160, 0 keys Zinc Short All Thicknesses Deadbolt YesA/A
0601650-13037-731091-1140201-742141-2240230-1101129412-07 Exterior Paddle Non-Handed Low Gloss Black KeyOne Plus, Master keyed/keyed random, 1091-1140, 2 keys on ring, Large Round Head Overmolded Key, Black key head, TriMark logo KeyOne Plus, Non-master keyed/keyed random, 2141-2240, 2 keys on ring, Large Rectangular Head Overmolded Key, Black Key head, TriMark logo Zinc Standard All Thicknesses Deadbolt YesA/A
0601650-13037-731091-1140201-742141-2240230-1102029412-01 Exterior Paddle Non-Handed Low Gloss Black KeyOne Plus, Master keyed/keyed random, 1091-1140, 2 keys on ring, Large Round Head Overmolded Key, Black key head, TriMark logo KeyOne Plus, Non-master keyed/keyed random, 2141-2240, 2 keys on ring, Large Rectangular Head Overmolded Key, Black Key head, TriMark logo Zinc Standard All Thicknesses Deadbolt Non Power Locking NoA/A
0601650-13037-731091-1140201-742141-2240230-1201029412-08 Exterior Paddle Non-Handed Low Gloss Black KeyOne Plus, Master keyed/keyed random, 1091-1140, 2 keys on ring, Large Round Head Overmolded Key, Black key head, TriMark logo KeyOne Plus, Non-master keyed/keyed random, 2141-2240, 2 keys on ring, Large Rectangular Head Overmolded Key, Black Key head, TriMark logo Zinc Short All Thicknesses Deadbolt NoA/A
0601650-13037-731091-1140201-742141-2240230-1202029412-13 Exterior Paddle Non-Handed Low Gloss Black KeyOne Plus, Master keyed/keyed random, 1091-1140, 2 keys on ring, Large Round Head Overmolded Key, Black key head, TriMark logo KeyOne Plus, Non-master keyed/keyed random, 2141-2240, 2 keys on ring, Large Rectangular Head Overmolded Key, Black Key head, TriMark logo Zinc Short All Thicknesses Deadbolt Non Power Locking NoA/A
0601650-13037-731091-1140201-742141-2240230-2201029412-09 Exterior Paddle Non-Handed Low Gloss Black KeyOne Plus, Master keyed/keyed random, 1091-1140, 2 keys on ring, Large Round Head Overmolded Key, Black key head, TriMark logo KeyOne Plus, Non-master keyed/keyed random, 2141-2240, 2 keys on ring, Large Rectangular Head Overmolded Key, Black Key head, TriMark logo Steel Short All Thicknesses Deadbolt NoA/A
0601650-13037-741001-1030201-741001-1030201-1101029412-04 Exterior Paddle Non-Handed Low Gloss Black KeyOne Plus, Non-master keyed/keyed random,1001-1030,2 keys on ring,Large Round Head Overmolded key,Black Key head,TriMark logo KeyOne Plus, Non-master keyed/keyed random,1001-1030,2 keys on ring,Large Round Head Overmolded key,Black Key head,TriMark logo Zinc Standard All Thicknesses Deadbolt NoA/A
©2018 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale