050-0502 Single Rotor Mini-Latch with Extended Actuator

This Single Rotor Latch is a sub-platform to the TriMark proven 050-0500 series latch and is designed for light to medium-duty applications for on or off highway compartments and access panels. It features an extended trip mechanism for applications where it is desirable to have the release mechanism directly in-line with the latch.

Designed For

Door closing forces of 15-20 lbs. (6.8-9 kg) recommended for best results. (not to exceed 50 lbs. (23 kg)
Release efforts are approximately proportional to door closing forces striker bolt load
Use with TriMark 070-0300 Striker Bolt

Features/Benefits

Variety of release mechanisms that can be used as finger releases, direct contact or in-line trip mechanisms for application flexibility
Compact Size
Lost Cost
Single or two position rotary style latching action

Available

Variety of release mechanisms that can be used as finger releases, direct contact or in-line trip mechanisms for application flexibility
In right or left hand configurations (right hand shown)
With 1/4-20 UNC, M6 X 1 threaded axles or .286 (7.3mm) thru axles
Base mounting option

Material

Internal latch components and case halves: High-strength steel
Springs: Non-corrosive stainless steel

Finish

Zinc plated, clear chromate steel components

Installation

(2) 1/4-20 UNC or M6 X 1 mounting fasteners (not included)
Custom mounting brackets available
Tighten to the manufacturers' recommended torque value, however, do not exceed 100 in-lbs. (11.2 N-m)

CAUTION: Latch does not meet FMVSS 206 (ECE R11) load requirements.