• Home
  • Industries
  • 070-0125 .500” (12.7mm) Diameter Striker Bolt (NON206)

070-0125 .500” (12.7mm) Diameter Striker Bolt (NON206)

Designed as a companion part for use with TriMark's single rotor latches and cage nuts that requires a .500" (12.7mm) diameter striker bolt and FVMSS 206 (ECE R11) is not required.

 

Installation

  • Torque to 35 ft-lbs (46.7 N-m)

Material

  • Typical materials include AISI 4140 and AISI C10B21 steel (or equivalent), heat treated to TriMark ES-141

Finish

  • Zinc plated with clear chromate

Caution: This headless striker bolt does not meet FMVSS 206 (ECE R11) load values.

Latch & Striker Installation

  • Install striker bolt in door frame
  • Close door carefully and check for interference between head of striker bolt and latch components
  • Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
  • Adjust striker bolt vertically so door is not guided upward or downward while being closed
  • CHECK TO DETERMINE THAT BOTH SECONDARY AND PRIMARY LATCHING POSITIONS ARE USABLE
  • Door should be latched but not "closed" in secondary position and latched to anticipated "closed" position with respect to adjacent surfaces in primary position
  • If both primary and secondary positions are not evident, readjust striker bolt
  • After installation, check door alignment and door seal pressures 

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

070-0125 .500” (12.7mm) Diameter Striker Bolt (NON206)

Please specify search criteria:


CompareCatalog NumberTriMark NumberShoulder DiameterThread SizeInstalled LengthThread LengthDrive Detail Internal or ExternalWasher Dia. X ThicknessStriker GuardStatus CodeSample RequestCAD Drawing
0700125-04-03-081-0595-03-12-012873-01 0.5 3/8-16 UNC-2B 0.81 0.595 0.250 Internal 1.13 X 0.11 NoA/A
0700125-04-03-091-0375-05-12-020912-01 0.5 3/8-16 UNC-2B 0.91 0.375 0.625 External 1.13 X 0.11 NoA/A
0700125-04-03-110-0563-05-12-011371-16 0.5 3/8-16 UNC-2B 1.10 0.563 0.625 External 1.13 X 0.11 NoA/A
0700125-04-03-124-0742-08-12-023204-01 0.5 3/8-16 UNC-2B 1.24 0.742 8mm Internal 1.13 X 0.11 NoA/A
0700125-04-03-149-0742-05-12-026511-01 0.5 3/8-16 UNC-2B 1.49 0.742 0.625 External 1.13 X 0.11 NoA/A
0700125-04-07-117-0605-01-02-017377-01 0.5 M10 X 1.5-6g 1.17 0.605 6mm Internal 0.79 X 0.11 NoA/A
0700125-04-07-150-0790-01-05-027761-01 0.5 M10 X 1.5-6g 1.5 0.790 6mm Internal 0.88 X 0.12 NoA/A
0700125-04-07-184-0810-01-10-020128-01 0.5 M10 X 1.5-6g 1.84 0.810 6mm Internal 1.10 X 0.15 NoA/A
0700125-17-11-192-0866-09-00-029483-01 0.67 M8 X 1.24 internal 1.92 0.866 22.23mm external shoulder NA NoA/A
0700125-18-12-111-0591-10-00-050890-01 0.354 M12 X 1.75-6G 1.11 0.591 16mm External NA NoA/A
0700125-18-12-111-0787-10-00-051602-01 0.354 M12 X 1.75-6G 1.11 0.787 16mm External NA NoA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale