030-1850 平装式翻板把手-刚性锁定

本款带刚性锁定嵌入式翻板把手为我公司畅销款030-0850
嵌入式翻板把手的新设计款。配以现代化外观,可用于
FMVSS206(ECER11)应用场合,可以电动锁定,带有四点
式支轴盘以及锁紧凸轮驱动。
●中型和重型公路用车辆的车厢门
●非公路用车辆应用—建筑、采矿、农业和林业用车
●公路用车辆—应急车辆

Designed for

  • Medium to heavy duty on-highway vehicle entrance doors
  • Off-highway applications--construction, mining, forestry and agricultural
  • On-highway--emergency vehicles

Features/Benefits

  • Automotive styling preferred by customers in the ambulance and fire truck market
  • Multiple connection points for use on inside lock and power lock actuation
  • Easy installation--do not have to maneuver large pivot plate through cut-out in the door
  • Molded rubber housing gasket and o-rings on the axle for better water infiltration resistance
  • Non-slip tape added for secure opening of the door


Material

  • Paddle and housing: sturdy die cast zinc alloy
  • Pivot components: heat-treated, mild steel for wear resistance
  • Bushing for paddle axle and thrust washer for pivot plate: Nylon 6/6

Finish

  • Available in a variety of finishes including black powder coated, high quality buffed CNNC chrome or a combination of black/chrome finish

Available

  • Left and right hand configurations
  • Includes gasket for flange of housing to provide resistance to water and dirt infiltration
  • Handle can keyed to match other TriMark door products with KeyOne Plus for a single-key system, keyed alike or provided non-locking
  • Customized bezel/trim for unique look for customers with the request of an added logo
    • Bezel kits sold separately (part number 36784)

  • Optional pivot plates (please inquire)

Installation

  • Design provides for easy installation without a mounting bracket with the use of (6) #8-32 fasteners
  • Can be installed in a wide range of locations in door - either horizontal or vertical (left hand shown)
  • Installs into current 030-0850 cut-outs
  • Door skin thickness - .083"-.127" (2.11mm-3.22mm)

Applications of this product may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified with the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

典型用途

典型应用用途图解按照行业/系统组织,目的在于给予用户指定采用TriMark产品的完整系统的一些思路。

不是所有行业/系统应用都具有典型用途图解。如果你的特定应用没有典型应用图解,请提交一份产品技术信息请求,我们的一位技术代表可以帮助您选择一个适用于您的特定应用的产品解决方案。

030-1850 平装式翻板把手-刚性锁定

  • 仿制老式车/组装车

    内部人员门

    外部人员进出门


  • 公共汽车/长途公共汽车

    检修面板

    内部隔间

    内部人员门

    外部储物舱

    外部人员进出门

    行李舱门


  • 火灾/救援/救护车/应急车辆

    检修面板

    内部人员门

    外部储物舱

    外部人员进出门


  • 阶梯上货货车/步入上货货车/ 运送车辆

    内部隔间

    内部人员门

    外部储物舱

    外部人员进出门


  • 旅行房车

    发动机机舱/机罩

    内部隔间

    内部人员门

    外部人员进出门

    行李舱门


  • 旅行拖车 /拖车活动房屋

    内部隔间

    内部人员门

    外部人员进出门

    行李舱门


  • 农用拖拉机/联合收割机

    检修面板

    内部人员门

    外部储物舱

    外部人员进出门

    外翻式窗户


  • 施工 – 起重和材料搬运

    检修面板

    内部人员门

    外部储物舱

    外部人员进出门


  • 施工 – 轻型掘土机械

    检修面板

    内部人员门

    外部储物舱

    外部人员进出门


  • 施工 – 重型掘土机械

    检修面板

    内部人员门

    外部储物舱

    外部人员进出门


  • 拖车 – 牧场/农场/运货/多用途

    检修面板

    内部隔间

    内部人员门

    外部储物舱

    外部人员进出门


  • 重型卡车/休息室

    内部人员门

    外部储物舱

    外部人员进出门

    行李舱门


请设置过滤条件:


    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale