030-1875 不固定翻板型平装式翻板把手

本款不固定型翻板平装式翻板把手为我公司畅销款030-0875
嵌入式翻板把手的新设计款。继承以前的成熟的机械零部件
并配以现代化外观,可用于FMVSS206(ECER11)应用,可以
电动锁定,还具同样的四点式远程支轴盘和锁紧转舌驱动。
●适用于中型和重型公路用车辆进出门,这些车辆多采用
浮动锁定设计
●非公路用车辆应用—建筑、采矿、农业和林业用车
●公路用车辆—应急车辆

Designed for

  • Medium to heavy-duty on-highway vehicle entrance doors where free-floating handle is preferred
  • Off-highway applications--construction, mining, forestry and agricultural
  • On-highway--emergency vehicles

Features/Benefits

  • Automotive styling preferred by customers in the ambulance and fire truck market
  • Multiple connection points for use on inside lock and/or power lock actuation
  • Easy installation--do not have to maneuver large pivot plate through cut-out in the door
  • Molded rubber gasket and o-rings on axle for better water infiltration resistance
  • Non-slip tape added for secure opening of the door

Material

  • Paddle and housing: sturdy die cast zinc alloy
  • Pivot components: heat-treated, mild steel for wear resistance
  • Bushing for paddle axle and thrust washer for pivot plate: Nylon 6/6

Finish

  • Available in a variety of finishes including black powder coated, high quality buffed CNNC chrome or a combination of black/chrome finish

Available

  • Left and right hand configurations available
  • Includes gasket for flange of housing to provide resistance to water and dirt infiltration
  • Handle can keyed to match other TriMark door product with KeyOne Plus for a single-key system, keyed alike or provided non-locking
  • Customized bezel/trim for unique look for customers with the request of an added logo
    • Bezel kits sold separately (part number 36784) 

  • Optional pivot plates (please inquire)

Installation

  • Design provides for easy installation without a mounting bracket with the use of (6) #8-32 fasteners
  • Can be installed in a wide range of locations in door - either horizontal or vertical orientation
  • Installs into current 030-0875 cut-outs
  • Door skin thickness - .083"-.127" (2.11mm-3.22mm)

U.S. Patent No. 8,881,564 / 10,024,085

U.S. Design Patent No. D694,087

Applications of this product may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified with the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

 

典型用途

典型应用用途图解按照行业/系统组织,目的在于给予用户指定采用TriMark产品的完整系统的一些思路。

不是所有行业/系统应用都具有典型用途图解。如果你的特定应用没有典型应用图解,请提交一份产品技术信息请求,我们的一位技术代表可以帮助您选择一个适用于您的特定应用的产品解决方案。

030-1875 不固定翻板型平装式翻板把手

  • 仿制老式车/组装车

    外部人员进出门


  • 公共汽车/长途公共汽车

    发动机机舱/机罩

    检修面板

    内部隔间

    外部储物舱

    外部人员进出门

    行李舱门


  • 火灾/救援/救护车/应急车辆

    检修面板

    内部隔间

    外部储物舱

    外部人员进出门


  • 阶梯上货货车/步入上货货车/ 运送车辆

    外部人员进出门


  • 旅行房车

    发动机机舱/机罩

    内部隔间

    外部人员进出门

    行李舱门


  • 旅行拖车 /拖车活动房屋

    内部隔间

    外部人员进出门

    行李舱门


  • 农用拖拉机/联合收割机

    发动机机舱/机罩

    检修面板

    门开启保持

    内部隔间

    外部储物舱

    外部人员进出门


  • 施工 – 起重和材料搬运

    检修面板

    内部隔间

    外部储物舱

    外部人员进出门


  • 施工 – 轻型掘土机械

    发动机机舱/机罩

    检修面板

    内部隔间

    外部储物舱

    外部人员进出门


  • 施工 – 重型掘土机械

    检修面板

    内部隔间

    外部储物舱

    外部人员进出门


  • 拖车 – 牧场/农场/运货/多用途

    货舱门

    检修面板

    外部人员进出门


请设置过滤条件:


    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale