030-2650 房车入口门硬件-旋转式

适用于房车和拖车入口门,本款新产品是针对对030-
1000/030-1050房车入口门硬件的重新设计。采用夹层安装
方式,简单方便;使用符合FMVSS206(ECER11)的直接驱动的
旋转闩锁,配有嵌入式门栓,更好地保证其安全性,可电动
锁合。
●房车入口门厚度为1.390英寸(35.3毫米)至1.78英寸
(45.2毫米)(不同的内板要求门厚度不同。请垂询后
确定。)
●五轮拖车、牵引式拖车和滑入式露营车
●为充分发挥其功能,保证其使用年限,门的密封压力不
超过40磅
●右手锁
●门防水且防止灰尘浸入
●与TriMark070-0100锁柱配合使用

Designed For

  • Motor home entrance doors with thickness ranging from 1.39" (35.3mm) to 1.78" (45.2mm) (Different inside handle assemblies are required to facilitate range of door thicknesses. Please identify when inquiring.)
  • Fifth-wheel trailers, pull-type trailers, and slide-in campers
  • Door seal pressures of 40 lbs. or less for ease of function and maximum life 
  • Right hand applications
  • Door requiring resistance to water and dirt infiltration
  • Use with TriMark 070-0100 Striker Bolt

Features/Benefits

  • Inside release is low profile .940"(23.9mm) to allow for close-fitting screen doors
  • Paddle can be locked before door is shut
  • Paddle is rigid when locked
  • Automotive styling
  • Comfortable finger access
  • Inside assist with open bail for easy closing
  • Can be keyed to match other TriMark door products with KeyOne Plus for a single-key system, keyed alike or provided non-locking
  • Built-in deadbolt eliminates the need for add-on residential type deadbolt (deadbolt option)
  • Deadbolt locks into the fully extended position for true deadbolt functioning (deadbolt option)
  • Ability to be used with power actuation for locking (deadbolt option)
  • Deadbolt cylinder non-removable when locked for added security

Available

  • With optional built-in dead bolt
  • Master keyed paddle key cylinder
  • Without key cylinders for matching entire vehicle cylinders after installation

Material

  • Housing, inside plates, handles, plunger bolt, deadbolt, locking components including lock knobs:Die cast zinc alloy

Finish

  • Black powder coated
  • Copper-nickel-chrome plated 
  • Other finishes available upon request 

Installation

  • (3) #10-24 UNC mounting screws (not included). Recommended torque 10 in-lbs (1.1 N-m)
  • Supplied with gaskets already installed
  • Sandwich mount installation does not require any linkage rods
  • Power actuators, power actuation mounting brackets and rods are available for optional power actuation of locks. Please inquire.

U.S. Patent No. 8,733,139

U.S. Design Patent No. D674,678 / D676,304

Applications of this system may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified within the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this system meets FMVSS 206 (ECE R11) loads and locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval

典型用途

典型应用用途图解按照行业/系统组织,目的在于给予用户指定采用TriMark产品的完整系统的一些思路。

不是所有行业/系统应用都具有典型用途图解。如果你的特定应用没有典型应用图解,请提交一份产品技术信息请求,我们的一位技术代表可以帮助您选择一个适用于您的特定应用的产品解决方案。

030-2650 房车入口门硬件-旋转式

  • 旅行房车

    内部人员门

    外部人员进出门


  • 旅行拖车 /拖车活动房屋

    内部人员门

    外部人员进出门


请设置过滤条件:


    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale