This single rotor latch is a sub-platform to the TriMark proven 050-0200 series latch and is designed for light to medium-duty applications for on or off highway compartments and access panels. It features an inline trip mechanism for applications where it is desirable to have the release mechanism in-line with the latch and a single position latch.
Designed For Thinner, light or medium weight door applications requiring resistance to dust and vibration Door weights up to 75 lbs. (34 kg) Door seal pressures of 20-25 lbs. (9-11 kg) recommended for best results. Not to exceed 50 lbs. (23 kg) Visible surface installation or concealed installation Applications where it is desireable to have the release mechanism in line with the latch Available Left or right hand configurations With standard .265 (6.7mm) diameter "thru" axles as shown, 1/4-20 UNC threaded axles (optional) or M6 X 1.0 threaded axles Material Internal latch components: heat treated smooth edge stamped steel Springs: non-corrosive stainless steel Case halves: high strength steel Installation Three 1/4-20 UNC grade 5-type or M6 x 1 class 8.8 or better fasteners are recommended Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt Internal Lubrication Oven-cured dry lubricant is applied on all critical moving parts Additional lubrication to be applied in the field if required Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.
Designed For
Available
Material
Installation
Internal Lubrication
Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.
典型应用用途图解按照行业/系统组织，目的在于给予用户指定采用TriMark产品的完整系统的一些思路。
不是所有行业/系统应用都具有典型用途图解。如果你的特定应用没有典型应用图解，请提交一份产品技术信息请求，我们的一位技术代表可以帮助您选择一个适用于您的特定应用的产品解决方案。
检修面板
外部储物舱
发动机机舱/机罩
行李舱门
门开启保持