030-0300 Entrance Door Hardware Set

This product was designed as a complete entrance door solution for RV motor homes. It features an exterior paddle; inside L handle release, safety deadbolt and an integrated 2 rotor latch for ease of installation and use.

Designed For

  • On-highway entrance door applications 

Features/Benefits

  • Inside lock provides override if outside paddle should be locked
  • Inside "L" handle provides door closure features
  • Manually operated safety dead bolt
  • Two rotor - two stage rotary door latch with primary and secondary latching positions 

Available

  • Keyed random
  • Right or left hand configurations (right hand shown)

Installation
  • (3) #10-24 UNC mounting screws (included)
  • (4) 1/4-20 UNC mounting fasteners (included)

Material

  • Exterior housing and paddle, interior cover plate and "L" handle: die cast zinc alloy
  • Rotors: heat treated, smooth edge stamped steel

Finish

  • Copper-nickel-chrome plated
  • Black powder coated

Internal Lubrication

  • Oven-cured dry lubricant is applied at factory on all critical moving parts
  • Additional lubrication to be applied in the field if required

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Applications of this system may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified within the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this system meets FMVSS 206 (ECE R11) loads and locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-0300 Entrance Door Hardware Set

  • Motor Homes

    Exterior Personnel Doors

    Interior Personnel Doors


  • Travel Trailer / 5th Wheel

    Exterior Personnel Doors

    Interior Personnel Doors


Please specify search criteria:


CompareCatalog NumberTriMark NumberHandingFinishKey CodeDescriptionDeadboltStatus CodeSample RequestCAD Drawing
0300300-1005-000000000-3011022-05 Right Hand Copper-Nickel Chrome NA Inside Plate No DeadboltA/A
0300300-1005-24RH001-050220-11Boxed Assembly10899-05-E Right Hand Copper-Nickel Chrome Single bitted, Non-master keyed/keyed random, RH001-050, 2 keys on ring, Small Round Head Overmolded Key, Black key head, TriMark logo Boxed Assembly DeadboltA/A
0300300-1005-24RH001-050220-2110608-05 Right Hand Copper-Nickel Chrome Single bitted, Non-master keyed/keyed random, RH001-050, 2 keys on ring, Small Round Head Overmolded Key, Black key head, TriMark logo Exterior Paddle DeadboltA/A
0300300-1068-000000000-3011883-01 Right Hand Black Textured Paint NA Inside Plate No DeadboltA/A
0300300-1068-23TM205-250220-2111896-01 Right Hand Black Textured Paint Single bitted, Master keyed/keyed random, TM205-250, 2 keys on ring, Small Round Head Overmolded Key, Black key head, TriMark logo Exterior Paddle DeadboltA/A
0300300-2005-000000000-3111021-05 Left Hand Copper-Nickel Chrome NA Inside Plate DeadboltA/A
0300300-2005-24RH001-050220-11Boxed Set10900-05-E Left Hand Copper-Nickel Chrome Single bitted, Non-master keyed/keyed random, RH001-050, 2 keys on ring, Small Round Head Overmolded Key, Black key head, TriMark logo Boxed Assembly DeadboltA/A
0300300-2012-000000000-3011884-12 Left Hand Medium Gloss Black NA Inside Plate No DeadboltA/A
0300300-2012-000000000-3111021-12 Left Hand Medium Gloss Black NA Inside Plate DeadboltA/A
0300300-2012-12TM211220-2112039-12 Left Hand Medium Gloss Black Single bitted, Non-master keyed/keyed alike, TM211, 2 keys on ring, Samll Round Head Overmolded Key, Black key head, TriMark logo Exterior Paddle DeadboltA/A
©2021 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale