020-1100 Remote Pull Handle

This product is designed for entrance doors on RV and specialty vehicles where it is desirable to have the exterior handle remotely mounted from the inside release and rotary latch. It features a large automotive styled exterior pull handle and latch mechanism and is adaptable for power locking.

 

The 020-1100 is not available for sale to the ambulance market or any patient transport vehicle until further notice.

Designed For

  • Entrance and compartment doors with thickness of 2.00" (50.8mm) minimum

Features/Benefits 

  • Automotive style pull handle and latch mechanism
  • Smooth opening/closing action
  • Comfortable finger access
  • Adaptable for power door lock actuation
  • Non-handed design--the pull handle can be mounted in vertical or horizontal orientations
  • Molded gasket for flange of housing and paddle leg provides resistance to water infiltration

Available


  • Master keyed lock key cylinder
  • Lock can be keyed to match other TriMark door products with KeyOne Plus for a single-key system, keyed alike or provided non-locking

Material


  • Sturdy die cast zinc alloy paddle and housing
  • Molded gaskets (included)

 

 

Installation

  • Easy to install with (4) #8-32 UNC mounting screws (not included)
  • Recommended mounting torque 30 in/lbs (3.4 N-m)

Finish

  • Black powder coated housing with black powder coated paddle or chrome plated paddle
  • Optional chrome plated housing

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

 

Caution: Applications of this product may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified with the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

020-1100 Remote Pull Handle

  • Bus / Motorcoach / Mass Transit

    Exterior Personnel Doors


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Exterior Personnel Doors


  • Motor Homes

    Exterior Personnel Doors


  • Trailers - Ranch / Farm / Cargo / Utility

    Exterior Personnel Doors


  • Travel Trailer / 5th Wheel

    Exterior Personnel Doors


Please specify search criteria:

 

  • Handing :

 

  • Finish :

 

  • Key Type (Head Configuration) :

 

  • Key Type (Color) :

 

  • Key Type (Logo) :

 

  • Keying :

 

  • Keying (Lock Cylinder Part Number) :

 

  • Keying (Keys Supplied) :

 

  • Keying (Key Part Number) :

 

  • Keying (Number of Keys per PN) :

 

  • Pivot Plate :

 

  • Lock Cam :

 

  • Mounting Bracket :

 

  • Packaging :

CompareCatalog NumberTriMark NumberHandingFinishKey Type (Head Configuration)Key Type (Color)Key Type (Logo)KeyingKeying (Lock Cylinder Part Number)Keying (Keys Supplied)Keying (Key Part Number)Keying (Number of Keys per PN)Pivot PlateLock CamMounting BracketPackagingStatus CodeSample RequestCAD Drawing
0201100-3037-00-00-00-00-0-0-0-0-1-0-1-223684-03 Non Handed Low Gloss Black No key No key No key Non-locking or N/A NA No NA 0 keys Right Hand Pivot Actuation No Lock Cam With Mounting Bracket BoxA/A
0201100-3037-00-00-00-00-0-0-0-0-2-0-0-222464-03 Non Handed Low Gloss Black No key No key No key Non-locking or N/A NA No NA 0 keys Left Hand Pivot Actuation No Lock Cam No Mounting Bracket BoxA/A
0201100-3037-00-00-00-00-0-0-0-0-2-0-1-031373-01 Non Handed Low Gloss Black No key No key No key Non-locking or N/A NA No NA 0 keys Left Hand Pivot Actuation No Lock Cam With Mounting Bracket NoneA/A
0201100-3037-00-00-00-09-0-0-0-0-1-1-0-222462-04 Non Handed Low Gloss Black No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders NA No NA 0 keys Right Hand Pivot Actuation Standard Lock Cam No Mounting Bracket BoxA/A
0201100-3037-00-00-00-09-0-0-0-0-2-1-0-228209-02 Non Handed Low Gloss Black No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders NA No NA 0 keys Left Hand Pivot Actuation Standard Lock Cam No Mounting Bracket BoxA/A
0201100-3063-00-00-00-00-0-0-0-0-1-0-0-123684-05 Non Handed Copper-Nickel Nickel Chrome No key No key No key Non-locking or N/A NA No NA 0 keys Right Hand Pivot Actuation No Lock Cam No Mounting Bracket Layered in TubA/A
0201100-3063-00-00-00-00-0-0-0-0-1-0-1-223684-04 Non Handed Copper-Nickel Nickel Chrome No key No key No key Non-locking or N/A NA No NA 0 keys Right Hand Pivot Actuation No Lock Cam With Mounting Bracket BoxA/A
0201100-3063-00-00-00-00-0-0-0-0-2-0-0-222464-04 Non Handed Copper-Nickel Nickel Chrome No key No key No key Non-locking or N/A NA No NA 0 keys Left Hand Pivot Actuation No Lock Cam No Mounting Bracket BoxA/A
0201100-3063-00-00-00-00-0-0-0-0-2-0-1-122464-05 Non Handed Copper-Nickel Nickel Chrome No key No key No key Non-locking or N/A NA No NA 0 keys Left Hand Pivot Actuation No Lock Cam With Mounting Bracket Layered in TubA/A
0201100-3063-00-00-00-02-16014.02.2001-0-0-0-1-2-0-024330-02 Non Handed Copper-Nickel Nickel Chrome No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS No NA 0 keys Right Hand Pivot Actuation Lock Cam with Power Lock Option No Mounting Bracket NoneA/A
0201100-3063-00-00-00-09-0-0-0-0-1-1-0-222462-05 Non Handed Copper-Nickel Nickel Chrome No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders NA No NA 0 keys Right Hand Pivot Actuation Standard Lock Cam No Mounting Bracket BoxA/A
0201100-3063-00-00-00-09-0-0-0-0-1-2-0-024330-01 Non Handed Copper-Nickel Nickel Chrome No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders NA No NA 0 keys Right Hand Pivot Actuation Lock Cam with Power Lock Option No Mounting Bracket NoneA/A
0201100-3063-00-00-00-09-0-0-0-0-2-1-0-228209-03 Non Handed Copper-Nickel Nickel Chrome No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders NA No NA 0 keys Left Hand Pivot Actuation Standard Lock Cam No Mounting Bracket BoxA/A
0201100-3063-01-03-02-02-16014.02.2001-1-16169.02.2001-1-1-1-1-222462-03 Non Handed Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 key Right Hand Pivot Actuation Standard Lock Cam With Mounting Bracket BoxA/A
0201100-3063-01-03-02-02-16014.02.2001-1-16169.02.2001-1-2-1-1-228209-01 Non Handed Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 key Left Hand Pivot Actuation Standard Lock Cam With Mounting Bracket BoxA/A
0201100-3063-01-03-02-03-16014.01.1022-1-16169.02.1022-1-1-1-0-134273-01 Non Handed Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS901,1022,IL,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key Right Hand Pivot Actuation Standard Lock Cam No Mounting Bracket Layered in TubA/A
0201100-3063-01-03-02-03-16014.01.1022-1-16169.02.1022-1-1-1-0-234273-02 Non Handed Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS901,1022,IL,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key Right Hand Pivot Actuation Standard Lock Cam No Mounting Bracket BoxA/A
0201100-3063-01-03-02-03-16014.01.1022-1-16169.02.1022-1-2-1-1-134197-01 Non Handed Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS901,1022,IL,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key Left Hand Pivot Actuation Standard Lock Cam With Mounting Bracket Layered in TubA/A
0201100-3063-01-03-02-03-16014.01.1022-1-16169.02.1022-1-2-1-1-234197-02 Non Handed Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS901,1022,IL,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key Left Hand Pivot Actuation Standard Lock Cam With Mounting Bracket BoxA/A
0201100-3063-01-03-02-03-16014.01.1022-1-16169.02.1022-2B-1-1-1-122462-07 Non Handed Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS901,1022,IL,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 2 keys not on ring Right Hand Pivot Actuation Standard Lock Cam With Mounting Bracket Layered in TubA/A
0201100-3099-00-00-00-00-0-0-0-0-1-0-1-123684-01 Non Handed Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle No key No key No key Non-locking or N/A NA No NA 0 keys Right Hand Pivot Actuation No Lock Cam With Mounting Bracket Layered in TubA/A
0201100-3099-00-00-00-00-0-0-0-0-1-0-1-223684-02 Non Handed Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle No key No key No key Non-locking or N/A NA No NA 0 keys Right Hand Pivot Actuation No Lock Cam With Mounting Bracket BoxA/A
0201100-3099-00-00-00-00-0-0-0-0-2-0-1-122464-01 Non Handed Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle No key No key No key Non-locking or N/A NA No NA 0 keys Left Hand Pivot Actuation No Lock Cam With Mounting Bracket Layered in TubA/A
0201100-3099-00-00-00-00-0-0-0-0-2-0-1-222464-02 Non Handed Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle No key No key No key Non-locking or N/A NA No NA 0 keys Left Hand Pivot Actuation No Lock Cam With Mounting Bracket BoxA/A
0201100-3099-01-03-02-02-16014.02.2001-1-16169.02.2001-1-1-1-1-222462-06 Non Handed Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 key Right Hand Pivot Actuation Standard Lock Cam With Mounting Bracket BoxA/A
0201100-3099-01-03-02-02-16014.02.2001-1-16169.02.2001-1-2-1-1-228209-04 Non Handed Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 key Left Hand Pivot Actuation Standard Lock Cam With Mounting Bracket BoxA/A
0201100-3099-01-03-02-03-16014.01.1022-1-16169.02.1022-2B-1-1-1-122462-01 Non Handed Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS901,1022,IL,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 2 keys not on ring Right Hand Pivot Actuation Standard Lock Cam With Mounting Bracket Layered in TubA/A
0201100-3099-01-03-02-03-16014.01.1022-1-16169.02.1022-2B-1-1-1-222462-02 Non Handed Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS901,1022,IL,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 2 keys not on ring Right Hand Pivot Actuation Standard Lock Cam With Mounting Bracket BoxA/A
©2022 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale