030-1860 Flush Mounted Paddle Handle With Inside Lock Knob

This flush mounted paddle handle with inside lock knob is a redesign of our popular 030-0860 Flush Mounted Paddle Handle. With a modernized look, it can be used in FMVSS 206 (ECE R11) applications, is power lockable and features a four point pivot plate and lock cam actuation.

Designed for

  • Medium to heavy duty on-highway vehicle entrance doors
  • Off-highway applications--construction, mining, forestry and agricultural
  • On-highway--emergency vehicles

Features/Benefits

  • Automotive styling preferred by customers in the ambulance and fire truck market
  • Multiple connection points for use on inside lock and power lock actuation
  • Easy installation--do not have to maneuver large pivot plate through cut-out in the door
  • Molded rubber housing gasket and o-rings on the axle for better water infiltration resistance
  • Non-slip tape added for secure opening of the door

Material

  • Paddle and housing: Sturdy die cast zinc alloy
  • Pivot components: Heat-treated, mild steel for wear resistance
  • Bushing for paddle axle and thrust washer for pivot plate: Nylon 6/6

Finish
  • Available in a variety of finishes including black powder coated, high quality buffed CNNC chrome or a combination of black/chrome finish

Available

  • Left and right hand configurations available   
  • Includes gasket for flange of housing to provide resistance to water and dirt infiltration
  • Customized bezel/trim for unique look for customers with the request of an added logo
    • Bezel kits sold separately (part number 36784)


Installation

  • Design provides for easy installation without a mounting bracket with the use (6) #8-32 fasteners
  • Can be installed in a wide range of locations in door - either horizontal or vertical orientation (left hand shown)
  • Installs into current 030-0860 cut-outs
  • Door skin thickness - .083"-.127" (2.11mm-3.22mm)

Design Patent No. D694,087

U.S. Patent No. 10,024,085

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Applications of this product may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified with the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-1860 Flush Mounted Paddle Handle With Inside Lock Knob

  • Agricultural Tractor / Combine

    Interior Personnel Doors


  • Armored Vehicle

    Interior Personnel Doors


  • Bus / Motorcoach / Mass Transit

    Interior Personnel Doors


  • Construction - Heavy Earthmoving

    Interior Personnel Doors


  • Construction - Lifting and Material Handling

    Interior Personnel Doors


  • Construction - Light Earthmoving

    Interior Personnel Doors


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Interior Personnel Doors


  • Heavy Truck / Sleeper Cabs

    Interior Personnel Doors


  • Motor Homes

    Interior Personnel Doors


  • Replicars / Kit Cars

    Interior Personnel Doors


  • Step Van / Walk-in Vans / Delivery Vehicle

    Interior Personnel Doors


  • Trailers - Ranch / Farm / Cargo / Utility

    Interior Personnel Doors


  • Travel Trailer / 5th Wheel

    Interior Personnel Doors


Please specify search criteria:


CompareCatalog NumberTriMark NumberHandingFinishPivot PlateOver-center spring on lock camPaddle logoStatus CodeSample RequestCAD Drawing
0301860-1-037-32403-31867-0-0031854-02 Right Hand Low Gloss Black Right Hand, 3-Point, .237” Holes, 32322-01 Counter Balance No No logoA/A
0301860-1-037-32403A-31859-0-0034198-01 Right Hand Low Gloss Black Right Hand, 4-Point, .237" Holes No No logoA/A
0301860-1-037-32403C-35247-0-0034184-01 Right Hand Low Gloss Black Right Hand, 3-Point, .237” Holes, 34514-01 Counter Balance No No logoA/A
0301860-1-063-32403-31867-0-0031854-03 Right Hand Copper-Nickel Nickel Chrome Right Hand, 3-Point, .237” Holes, 32322-01 Counter Balance No No logoA/A
0301860-1-063-32403A-31867-0-0031854-01 Right Hand Copper-Nickel Nickel Chrome Right Hand, 4-Point, .237" Holes No No logoA/A
0301860-1-099-32403-31867-0-0031854-05 Right Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Right Hand, 3-Point, .237” Holes, 32322-01 Counter Balance No No logoA/A
0301860-2-037-32402A-31859-0-0034274-01 Left Hand Low Gloss Black Left Hand, 4-Point, .237" Holes No No logoA/A
0301860-2-037-32402B-35249-0-0034271-01 Left Hand Low Gloss Black Left Hand, 4-Point, .237" Holes, 34514-01 Counter Balance No No logoA/A
0301860-2-063-34641B-31867-0-0031720-04 Left Hand Copper-Nickel Nickel Chrome Left Hand, 3-Point, .237" Holes, 32322-01 Counter Balance, (1x) Rod Clip No No logoA/A
0301860-2-063-34709A-31867-0-0031720-02 Left Hand Copper-Nickel Nickel Chrome Left Hand, 4-Point, .237" Holes, (1x) Rod Clip No No logoA/A
0301860-2-099-34641B-31867-0-0031720-03 Left Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Left Hand, 3-Point, .237" Holes, 32322-01 Counter Balance, (1x) Rod Clip No No logoA/A
0301860-2-099-34709A-31867-0-0031720-01 Left Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Left Hand, 4-Point, .237" Holes, (1x) Rod Clip No No logoA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale