090-0120 Rods

TriMark's control rods provide a connection between handles, latches, locks and linkages for remote actuation. These are available in a wide variety of options that include different lengths, diameters, offsets, retainer clips and adjustment features depending on the application requirements.


For more information on rods built to your specification, please contact TriMark at 1-800-447-0343.


Designed For

  • Remote connection between TriMark handles, latches, locks and linkages
  • Light to heavy duty applications for on or off-highway entrance and compartment doors
  • Applications that require the transmission of forces in tension or compression

 Available

  • In custom configurations and specific lengths to suit the application
    • Multiple bend capability including compound bend angles

  • Available in the following rod diameters:
    •  .125" (3.2mm)
    •  .142" (3.6mm)
    •  .156" (4.0mm)
    •  .168" (4.3mm)
    •  .188" (4.8mm)
    •  .214" (5.4mm)
    •  .250" (6.4mm)
    •  .375" (9.5mm)  
    •  .390" (9.9mm)

  • Secondary operations including threading and swaging are available
  • TriMark has experienced engineering and technical staff available to review your product requirements and suggest the best solution for your application

Material/Finish

  • Low carbon steel rod material
  • Zinc plated, clear chromate finish

Installation

  • Provides for easy assembly of door hardware/system

Caution: Applications of this product may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified with the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

090-0120 Rods

Please specify search criteria:


©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale