030-0550 Heavy Duty Pivoting Catch Compartment Latch

This latch was specifically designed for storage and compartment doors for off-road vehicles including agricultural and construction equipment, armored vehicle and industrial enclosures. It has a high strength laminated hook and a heavy duty die-cast zinc paddle that provides a higher level of resistance to vibration and wear over the 030-0500 latch.

Designed For

  • On or off-highway vehicle applications - construction, mining, agricultural
  • Service and utility truck body doors
  • Electrical switch and transformer boxes

Features/Benefits

  • The high strength steel laminated hook resists wear and increases strength
  • Heavy duty zinc die-cast paddle resists deformation
  • Retrofits that same cutout as the 030-0500 Pivoting Catch Compartment Latch
  • Pivoting catch allows relative movement between the door and frame when the vehicle frame flexes
  • Components are spring loaded internally to minimize effects of vibration
  • Reverse paddle design of the compartment latch is suited for top hinged doors and provides resistance to insertion of foreign objects
  • Provides a higher level of resistance to vibration and wear

Available

  • Key locking - keyed alike with most common key codes to match paddle actuators used for operator enclosures
  • Non-locking
  • Padlockable for increased security
  • Optional hole patterns

Material

  • All steel reinforced construction

Finish

  • Zinc plate, clear chromate conversion coat for maximum paint adhesion and resistance to rust
  • Black powder coat

Installation

  • Lock cylinder may be installed after the latch has been assembled into the door and painted
  • (4) 3/16" M4 diameter steel "pop" rivets, 1/4-20 or M6  x 1 screws (not included)

Caution: Latch does not meet FMVSS 206 (ECE R11) load requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-0550 Heavy Duty Pivoting Catch Compartment Latch

  • Armored Vehicle

    Exterior Storage Compartments


  • Construction - Heavy Earthmoving

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Trailers - Ranch / Farm / Cargo / Utility

    Access Panels

    Exterior Storage Compartments


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments


Please specify search criteria:


CompareCatalog NumberTriMark NumberHandingFinishKey CodeMounting HolesHook ActuationStatus CodeSample RequestCAD Drawing
0300550-3015-000000000-2218530-05 Non-Handed Zinc Plate/Clear Chromate Non-Locking .266 Diameter (6.8mm) Perpendicular to LatchA/A
0300550-3015-12AR51481000-1218321-01 Non-Handed Zinc Plate/Clear ChromateSingle bitted, Non-master keyed/keyed alike, AR51481, 0 keys .218 Diameter (5.5mm) Perpendicular to LatchA/A
0300550-3015-12AR51481000-12 Lock Cover18321-11 Non-Handed Zinc Plate/Clear ChromateSingle bitted, Non-master keyed/keyed alike, AR51481, 0 keys .218 Diameter (5.5mm) Perpendicular to LatchA/A
0300550-3015-900000000-1133317-01 Non-Handed Zinc Plate/Clear Chromate Padlockable .218 Diameter (5.5mm) Parallel to LatchA/A
0300550-3015-900000000-1218530-01 Non-Handed Zinc Plate/Clear Chromate Padlockable .218 Diameter (5.5mm) Perpendicular to LatchA/A
0300550-3037-12AR51481000-1218321-06 Non-Handed Low Gloss BlackSingle bitted, Non-master keyed/keyed alike, AR51481, 0 keys .218 Diameter (5.5mm) Perpendicular to LatchA/A
0300550-3037-12CH751233-1218321-02 Non-Handed Low Gloss Black Single bitted, Non-master keyed/keyed alike, CH751, 2 keys on ring, Small Round Head Stamped Key- No overmold, Brass key head, Fort Lock logo .218 Diameter (5.5mm) Perpendicular to LatchA/A
0300550-3037-12TM700233-1218321-10 Non-Handed Low Gloss Black Reversible, Non-master keyed/keyed alike, TM700, 2 keys on ring, Small Round Head Stamped Key- No overmold, Brass key head, Fort Lock logo .218 Diameter (5.5mm) Perpendicular to LatchA/A
0300550-3037-52VOL01-1233670-01 Non-Handed Low Gloss Black Reversible, Non-master keyed/keyed alike, VOL1, 0 keys .218 Diameter (5.5mm) Perpendicular to LatchA/A
0300550-3037-52VOL10-1251978-01 Non-Handed Low Gloss Black Reversible, Non-master keyed/keyed alike, VOL1, 0 keys .218 Diameter (5.5mm) Perpendicular to LatchA/A
0300550-3037-64TM700-729233-1218321-09 Non-Handed Low Gloss Black Reversible, Non-master keyed/keyed random, TM700-729, 2 keys on ring, Small Round Head Stamped Key- No overmold, Brass key head, Fort Lock logo .218 Diameter (5.5mm) Perpendicular to LatchA/A
0300550-3037-900000000-1133317-02 Non-Handed Low Gloss Black Padlockable .218 Diameter (5.5mm) Parallel to LatchA/A
0300550-3037-900000000-1218530-02 Non-Handed Low Gloss Black Padlockable .218 Diameter (5.5mm) Perpendicular to LatchA/A
    ©2021 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale