050-1600 TriGuard Heavy Duty Single Rotor Latch

This latch module is designed for medium to heavy-duty vehicle entrance and rear door applications. It features a proven single rotor latch design, high strength 8 gauge (4.2mm) front mounting plate and robust straddle mount release lever. The slim design mounts into 2.00" (50.8mm) doors and retrofits competitive single rotor wedge style rotary latches.

Designed For

  • Medium to heavy duty doors of 23-91 kg (50-200 lbs.) with door seal pressures of 23-60 kg (50-150 lbs.)
  • Use with TriMark 070-0201 Striker Bolt

Features/Benefits

  • Heavy duty modular construction -- survives in punishing environments  
  • Can be used on retrofit or new surface mount vehicle construction
  • .550" (13.9mm) diameter striker bolt

Available

  • Right or left hand configurations (left hand shown)
  • Custom configured release levers
  • Other mount options (please inquire)
  • Heavy duty latch/striker provides rotor/cam assist to heavy doors, hinges and compensates for door sag

Material
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel
  • Rotor and catch: heat treated high strength steel with dry lube coating

Finish
  • Standard: RoHS compliant zinc plated, clear chromate steel components

Installation

  • (3) M8 x 1.25 class 8.8 or 5/16-18 UNC grade 8 or better fasteners are recommended (not included)
  • Tighten to the manufacturers' recommended torque value

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Applications of this latch may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified within the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested with approved TriMark Striker Bolts in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) load requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-1600 TriGuard Heavy Duty Single Rotor Latch

  • Agricultural Tractor / Combine

    Engine Compartments / Hoods


  • Armored Vehicle

    Exterior Personnel Doors

    Interior Personnel Doors

    Rear Doors

    Systems


  • Construction - Heavy Earthmoving

    Access Panels

    Engine Compartments / Hoods

    Exterior Personnel Doors


  • Construction - Lifting and Material Handling

    Access Panels

    Engine Compartments / Hoods

    Exterior Personnel Doors


  • Construction - Light Earthmoving

    Access Panels

    Engine Compartments / Hoods

    Exterior Personnel Doors


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


Please specify search criteria:

 

  • Handing :

 

  • Finish :

 

  • Mounting :

 

  • 1st Actuation :

 

  • 2nd Actuation :

 

  • Special :

CompareCatalog NumberTriMark NumberHandingFinishMounting1st Actuation2nd ActuationSpecialStatus CodeSample RequestCAD Drawing
0501600-1-015-03-28810-32341-132360-01 Right Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through Flat cam,Non-handed,1.25 (31.8mm),No holes L-Shaped,Non-Handed,2 Holes,1.65 x .38 x .30 DIA Hole,2.32 x .40 x .27 DIA Hole,(41.9 mm x 9.7 mm x 7.6 mm Dia Hole, 58.9 mm x 10.2 mm x 6.9 mm Dia Hole) PinsA/A
0501600-1-015-03-28810-32341-432360-02 Right Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through Flat cam,Non-handed,1.25 (31.8mm),No holes L-Shaped,Non-Handed,2 Holes,1.65 x .38 x .30 DIA Hole,2.32 x .40 x .27 DIA Hole,(41.9 mm x 9.7 mm x 7.6 mm Dia Hole, 58.9 mm x 10.2 mm x 6.9 mm Dia Hole) Pins + Export LabelA/A
0501600-1-015-03-28964-00000-028962-02 Right Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through 2-Lobes,Non-handed,1.06 x .12 x .92 x .13 x .25 DIA Holes,(26.9 mm x 3.0 mm x 23.4 mm x 3.3 mm x 6.4 mm Dia) NA NAA/A
0501600-1-015-03-28964-00000-328962-01 Right Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through 2-Lobes,Non-handed,1.06 x .12 x .92 x .13 x .25 DIA Holes,(26.9 mm x 3.0 mm x 23.4 mm x 3.3 mm x 6.4 mm Dia) NA Export LabelA/A
0501600-1-015-03-3-415-00000-041544-01 Right Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through L Shaped, Right Hand, .25 X .25 Slot NA NAA/A
0501600-1-015-03-34421-34422-034979-01 Right Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through Offset,Finger Release,Left Hand,1.1 Offset,1.44 x .25 x .25 DIA Hole,(36.6 mm x 6.4 mm x 6.4 Dia Hole), Opp Hand 34444-01 Finger Release,Right Hand,1.0 x 1.25 x .39 DIA Hole,(25.4 mm x 31.8 mm x 9.9 mm Dia Hole) Opp Hand 34445-01 NAA/A
0501600-1-015-03-34444-34445-035079-01 Right Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through Offset,Finger Release,Right Hand,1.44 x .25 x .25 DIA Hole,(36.6 mm x 6.4 mm x 6.4 Dia Hole),Opp Hand 34421-01 Finger Release,Left Hand,1.0 x 1.25 x .39 DIA Hole,(25.4 mm x 31.8 mm x 9.9 mm Dia Hole) Opp Hand 34422-01 NAA/A
0501600-1-015-03-37192-37191-037190-01 Right Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through LEVER,TRIP,6.4MM LEVER,TRIP,6.4MM HOLE NAA/A
0501600-1-015-03-39124-32341-139133-01 Right Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through Remote Latching, Right Hand L-Shaped,Non-Handed,2 Holes,1.65 x .38 x .30 DIA Hole,2.32 x .40 x .27 DIA Hole,(41.9 mm x 9.7 mm x 7.6 mm Dia Hole, 58.9 mm x 10.2 mm x 6.9 mm Dia Hole) PinsA/A
0501600-2-015-03-28810-32341-132359-01 Left Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through Flat cam,Non-handed,1.25 (31.8mm),No holes L-Shaped,Non-Handed,2 Holes,1.65 x .38 x .30 DIA Hole,2.32 x .40 x .27 DIA Hole,(41.9 mm x 9.7 mm x 7.6 mm Dia Hole, 58.9 mm x 10.2 mm x 6.9 mm Dia Hole) PinsA/A
0501600-2-015-03-28810-32341-432359-02 Left Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through Flat cam,Non-handed,1.25 (31.8mm),No holes L-Shaped,Non-Handed,2 Holes,1.65 x .38 x .30 DIA Hole,2.32 x .40 x .27 DIA Hole,(41.9 mm x 9.7 mm x 7.6 mm Dia Hole, 58.9 mm x 10.2 mm x 6.9 mm Dia Hole) Pins + Export LabelA/A
0501600-2-015-03-28964-00000-028961-02 Left Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through 2-Lobes,Non-handed,1.06 x .12 x .92 x .13 x .25 DIA Holes,(26.9 mm x 3.0 mm x 23.4 mm x 3.3 mm x 6.4 mm Dia) NA NAA/A
0501600-2-015-03-28964-00000-328961-01 Left Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through 2-Lobes,Non-handed,1.06 x .12 x .92 x .13 x .25 DIA Holes,(26.9 mm x 3.0 mm x 23.4 mm x 3.3 mm x 6.4 mm Dia) NA Export LabelA/A
0501600-2-015-03-34444-34445-035060-01 Left Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through Offset,Finger Release,Right Hand,1.44 x .25 x .25 DIA Hole,(36.6 mm x 6.4 mm x 6.4 Dia Hole),Opp Hand 34421-01 Finger Release,Left Hand,1.0 x 1.25 x .39 DIA Hole,(25.4 mm x 31.8 mm x 9.9 mm Dia Hole) Opp Hand 34422-01 NAA/A
0501600-2-015-03-37192-37191-037206-01 Left Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through LEVER,TRIP,6.4MM LEVER,TRIP,6.4MM HOLE NAA/A
0501600-2-015-03-39035-32341-139080-01 Left Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through Remote Latching, Left Hand L-Shaped,Non-Handed,2 Holes,1.65 x .38 x .30 DIA Hole,2.32 x .40 x .27 DIA Hole,(41.9 mm x 9.7 mm x 7.6 mm Dia Hole, 58.9 mm x 10.2 mm x 6.9 mm Dia Hole) PinsA/A
0501600-2-015-03-39645-00000-039644-01 Left Hand Zinc Plate/Clear Chromate .326 (8.3mm) Diameter Through L Shaped,.25 DIA HOLE,DIP NA NAA/A
©2025 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale