080-0500 Grapple Style Compression Latch

This new grapple style compression latch is designed for compartments, access panels and hoods for off-highway vehicle applications that are subject to high vibration loads. Offering 5mm of compression, the three robust opposing jaws work with a striker diameter of 8.0-9.5mm (.315"-.375"), providing a high level of resistance to vibration, shock and wear.


    Features/Benefits

    • Its use in gasketed applications meets requirements for environmental sealing, noise and airflow management - helps reduce or eliminate noise and rattle caused by vibration
    • Sealed housing provides for minimal intrusion of dirt and water
    • Easy to install, the product offers the same look and mounting pattern as the popular 030-0500/030-0550, offering customers a heavy duty product upgrade
    • Intuitive open and close actuation does not require a turning operation
    • Handle provides over-center action and remains up (flagged) when latch is open providing clear open/closed status

    Available 

    • Locking options include a standard padlock hasp with key locking provision to add a cam lock for increased security or keyed alike to common lock codes to match paddle actuators used for operator enclosures
    • Non-locking
    • Optional mounting hole patterns

    Material

    • Handle: Sturdy die cast zinc
    • Latch and housing: Steel reinforced construction

    Finish

    • Zinc plate, clear chromate conversion coat for maximum paint adhesion and resistance to rust
    • Black powder coated

    Installation

    • Lock cylinder may be installed after the latch has been assembled into the door and painted
    • (4) M4 or 3/16" diameter steel "pop" rivets, M6 x 1 or 1/4-20 screws (not included)

    U.S. Patent No. 8,770,635

    Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

    Typical Uses

    Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

    Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

    080-0500 Grapple Style Compression Latch

    • Agricultural Tractor / Combine

      Access Panels

      Engine Compartments / Hoods


    • Armored Vehicle

      Exterior Storage Compartments


    • Construction - Heavy Earthmoving

      Access Panels

      Engine Compartments / Hoods


    • Construction - Lifting and Material Handling

      Engine Compartments / Hoods


    • Construction - Light Earthmoving

      Access Panels

      Engine Compartments / Hoods


    Please specify search criteria:


    CompareCatalog NumberTriMark NumberHandingFinishKey CodeMounting HolesJaw HeightStatus CodeSample RequestCAD Drawing
    0800500-3015-000000000-1131239-01 Non-handed Zinc Plate/Clear Chromate Non-Locking .218 (5.5mm) 86mmA/A
    0800500-3015-12AR51481000-131617-02 Non-handed Zinc Plate/Clear Chromate Single bitted, Non-master keyed/keyed alike, AR51481, 0 keys .218 (5.5mm) 75mmA/A
    0800500-3015-12AR51481000-1131239-02 Non-handed Zinc Plate/Clear Chromate Single bitted, Non-master keyed/keyed alike, AR51481, 0 keys .218 (5.5mm) 86mmA/A
    ©2021 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale