030-0100 Single Rotor Compartment Latch

Designed for most medium to heavy-duty storage and compartment doors, this product features an integrated rotary latch for ease of installation and use.

Designed For

  • On or off-highway vehicle applications -- construction, mining, agricultural
  • Service and utility truck body doors
  • Fire and rescue unit vehicles
  • Most storage, compartment and access doors with latch and strike location at top or sides of door
  • Door weights of approximately 75 lbs. (34 kg) or less


  • Keyed alike 
  • Keyed random
  • Padlockable


  • Housing and paddle: die cast zinc alloy
  • Other components: zinc plated, mild steel
  • Internal latch components: case hardened, smooth edge stamped steel


  • Clear chromate, ready to paint
  • Buffed copper-nickel-chrome plated
  • Buffed duplex nickel

Internal Lubrication

  • Oven-cured dry lubricant is applied on all critical moving parts



  • 3/16" (4mm) diameter fasteners

Application Recommendations

  • Striker bolt installation should allow for a minimum radial movement of .060" (1.524mm)
  • Rubber bumpers or door seals are recommended to reduce effects of vibration stress on door and latch system

Latch & Striker Installation

  • Install striker bolt in door frame
  • Close door carefully and check for interference between head of striker bolt and latch components
  • Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
  • Adjust striker bolt vertically so door is not guided upward or downward while being closed
  • Door should be latched but not "closed" in secondary position and latched to anticipated "closed" position with respect to adjacent surfaces in primary position
  • If both primary and secondary positions are not evident, readjust striker bolt.

Caution: Latch does not meet FMVSS 206 (ECE R11) load requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available. 

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-0100 Single Rotor Compartment Latch

  • Armored Vehicle

    Exterior Storage Compartments

  • Construction - Heavy Earthmoving

    Exterior Storage Compartments

  • Construction - Lifting and Material Handling

    Exterior Storage Compartments

  • Construction - Light Earthmoving

    Exterior Storage Compartments

  • Fire / Rescue / Ambulance / Emergency Vehicle

    Exterior Storage Compartments

  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments

  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments

    Tool Boxes

Please specify search criteria:

CompareCatalog NumberTriMark NumberHandingFinishKey Type (Head Configuration)Key Type (Color)Key Type (Logo)KeyingKeying (Lock Cylinder Part Number)Keying (Keys Supplied)Keying (Key Part Number)Keying (Number of Keys per PN)Status CodeSample RequestCAD Drawing
0300100-3-015-00-00-00-02-14082.01-0-0-012114-09 Non-Handed Zinc Plate/Clear Chromate No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS190,AR51481,NO KEYS No NA 0 keysA/A
0300100-3-015-00-00-00-02-14082.02-0-0-011517-09 Non-Handed Zinc Plate/Clear Chromate No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS900,LL11,NO KEYS No NA 0 keysA/A
©2022 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale