130-0100 Dual Release Door Hold-Open

This product is designed for light to medium duty agricultural, construction personnel doors or any door that needs to be held in an open position. The simple rotating knob design allows for the door to be released from the open position from either the inside of the cab or from the ground level.

Designed For

  • Any application where it is desirable to hold or retain a hinged door in an open position

Features/Benefits

  • New shroud design provides a means to absorb shock loads and provide door release
  • Revised mounting provides easier installation and alignment
  • Simple, easy to use, rotating knob/pin latch
  • Engineered to withstand vibration, shock, dust, dirt and moisture
  • Ergonomic knob design
  • Two-stage lead in helps align the striker and receiver to compensate for door sag
  • Universal design
  • Rotating knob(s) allows for the door to be released from the open position from either the inside of the cab or from the ground level
  • Durability in tough applications
  • Easy to install
  • Easily adaptable to a wide variety of door/cab configurations
  • Fills a niche between the low cost "friction type" hold-opens and top end rotary and bayonet style products presently available

Caution: Door hold-open is not designed to secure a door in the closed position and does not comply with FMVSS 206.

Material

  • Striker and receiver components:  Acetal, black 
  • Knob and mounting bracket components: Impact modified Nylon 6/6, black
  • Shroud: Thermoplastic rubber (TPR), black
  • Torsion spring: 302 stainless steel
  • Mounting fasteners: Carbon steel, zinc plated, black chromate
  • Gasket: Neoprene, black

 Installation

  • Easy to install with special thread forming screws (included)
  • Flange mounting and self adhesive gaskets (included) permits through glass mounting

Available

  • With gasket options to adapt to a wide range of door/cab thickness 3mm-6mm (.118-.236")

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

130-0100 Dual Release Door Hold-Open

  • Construction - Lifting and Material Handling

    Door Hold Open


  • Construction - Light Earthmoving

    Door Hold Open


Please specify search criteria:


CompareCatalog NumberTriMark NumberDescriptionStatus CodeSample RequestCAD Drawing
1300100-010119371-02Dual Release Door Hold-Open, Striker Assembly, 3-4mm (.118-.157)A/A
1300100-010219371-01Striker Assembly, 5-6mm (.197-.236)A/A
1300100-020119372-02Dual Release Door Hold-Open, Receiver Assembly, 3-4mm (.118-.157)A/A
1300100-030219375-01Dual Release Door Hold-Open, Striker/Receiver Set, 5-6mm (.197-.236)A/A
1300100-030319375-03Dual Release Door Hold-Open, Striker/Receiver Set, Striker Assembly 3-4mm (.118-.157), Receiver 5-6mm (.197-.236)A/A
    ©2021 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale