050-0113 Two Rotor Latch Single-Position Intertrip

This two rotor latch is a sub-platform to the TriMark proven 050-0100 series latch and is designed for medium to heavy-duty applications for on or off highway entrance doors, compartments and access panels. It features an internal trip mechanism for applications where it is desirable to have the release mechanism in-line with the latch and a single position latch.

 

 

DESIGNED FOR:

  • Door thicknesses of 1-7/8" or greater (47.6mm)
  • Door weights of 50-200 lbs. (23-91 kg)
  • Door seal pressures of 50-150 lbs. (23-68 kg)(suggested for best results)
  • Use with TriMark 070-0200 Striker Bolt

AVAILABLE:

  • In left or right hand configurations
  • With (4) 1/4-20 UNC, M6 x 1 threaded axles or .286" (7.3mm) diameter "thru" axles
  • With trip lever options.

FINISH:

  • Zinc plated, clear chromate steel components

MATERIAL:

  • Internal latch components: heat treated, smooth edge stamped steel
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel

INSTALLATION:

  • (4) 1/4-20 UNC grade 5, M6 x 1 class 8.8 or better fasteners are required (not included).
  • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)
  • Fastener mounting holes diameter should not exceed .281" (7.1 mm)

STRIKER INSTALLATION:

  • Install striker bolt in door frame
  • Close door carefully and check for interference between head of striker bolt and latch components
  • Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
  • Adjust striker bolt vertically so door is not guided upward or downward while being closed
  • CHECK TO DETERMINE THAT BOTH SECONDARY AND PRIMARY LATCHING POSITIONS ARE USABLE
  • Door should be latched but not "closed" in secondary position with respect to adjacent surfaces in primary position
  • If both primary and secondary positions are not evident, readjust striker bolt
  • After installation, check door alignment and door seal pressures

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0113 Two Rotor Latch Single-Position Intertrip

  • Agricultural Tractor / Combine

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Bus / Motorcoach / Mass Transit

    Access Panels

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Heavy Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Access Panels

    Exterior Storage Compartments


  • Heavy Truck / Sleeper Cabs

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Tool Boxes


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Baggage Doors

    Engine Compartments / Hoods


  • Replicars / Kit Cars

    Engine Compartments / Hoods


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Storage Compartments

    Tool Boxes


  • Trailers - Ranch / Farm / Cargo / Utility

    Access Panels

    Exterior Storage Compartments


  • Travel Trailer / 5th Wheel

    Baggage Doors


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments

    Tool Boxes


Please specify search criteria:


CompareCatalog NumberTriMark NumberHandingMountingActuationCatch SpringInternal Trip Lever SpringStatus CodeSample RequestCAD Drawing
0500113-101-16368-010016623-01 Right Hand 1/4-20 UNC Direct Release-Straight, Right Hand Actuator, 1.732 X .276 X 36 Degree Form, No Holes Normal Duty Catch Spring NoneA/A
0500113-101-33196-020133197-01 Right Hand 1/4-20 UNC Direct Release L-Shaped, Right-Hand, .76 x 1.85 (19.41mm x 46.91mm), Spring Hole Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-102-11562-010013284-03 Right Hand .286 (7.3mm) Diameter Through Axles Direct Release-Straight, Non-Handed/None, 1.71 X 1.63 (43.4mm X 41.3mm), Threaded 1/4-20 Normal Duty Catch Spring NoneA/A
0500113-102-16368-010016369-01 Right Hand .286 (7.3mm) Diameter Through Axles Direct Release-Straight, Right Hand Actuator, 1.732 X .276 X 36 Degree Form, No Holes Normal Duty Catch Spring NoneA/A
0500113-102-21895-010121782-01 Right Hand .286 (7.3mm) Diameter Through Axles Direct Release L-Shaped, Left Hand, .80 X 1.12 (20.3 mm X 28.4 mm) Form Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-102-25061-010221530-01 Right Hand .286 (7.3mm) Diameter Through Axles Direct Release L-Shaped, Right Hand, 2.36 X 2.93 (59.9mm X 74.4mm) Normal Duty Catch Spring Heavy Duty Internal Trip Lever SpringA/A
0500113-106-12567-010017937-01 Right Hand M6 X 1.0 Direct Release-Straight, Non-Handed/None, 1.71 X 1.63 (43.4mm X 41.3mm), Threaded 6mm Normal Duty Catch Spring NoneA/A
0500113-106-17664-010317665-01 Right Hand M6 X 1.0 Direct Release-Straight, Right Hand Actuator, 2.920 X 2.340 X 1.160 Form, No Holes Normal Duty Catch Spring High Stress Internal Trip Lever SpringA/A
0500113-106-21903-010216961-01 Right Hand M6 X 1.0 Direct Release L-Shaped, Right Hand Nose, 2.50 X 1.12 X .25 Dia Hole (63.5mm X 28.4mm X 6.4mm) form, hole Normal Duty Catch Spring Heavy Duty Internal Trip Lever SpringA/A
0500113-106-21946-020131170-01 Right Hand M6 X 1.0 Direct Release L-Shaped, Right Hand, 1.81 X 1.30 X 9.4 Dia Slot (46.0mm X 32.9mm X .37mm) Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-106-29681-010131120-01 Right Hand M6 X 1.0 Direct Release L-Shaped, Left Hand, 1.18 x 2.36 (30mm x 60mm) Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-106-36115-010136116-01 Right Hand M6 X 1.0 Direct Release -straight, Non-handed, 22.7 X 95.4 X 17 X 26deg, Spring holes Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-106-38744010138745-01  M6 X 1.0 Trip Lever, Internal, Right Hand, 7mm (.276) Hole Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-201-27877-020133195-01 Left Hand 1/4-20 UNC Direct Release L-Shaped, Left-Hand, .76 x 1.85 (19.41mm x 46.91mm), Spring Hole Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-201-81069-010016622-01 Left Hand 1/4-20 UNC Direct Release-Straight, Right Hand Actuator, 1.73 X .28 (44.0mm X 7.0mm) X 36 Degree Form, No Holes Normal Duty Catch Spring NoneA/A
0500113-201-81110-010015372-01 Left Hand 1/4-20 UNC Direct Release-Straight, Non-Handed/None, 1.81 X .27 (46.0mm X 6.9mm), No Holes Normal Duty Catch Spring NoneA/A
0500113-201-81110-0100 back plate-back center cut out20857-01 Left Hand 1/4-20 UNC Direct Release-Straight, Non-Handed/None, 1.81 X .27 (46.0mm X 6.9mm), No Holes Normal Duty Catch Spring NoneA/A
0500113-202-11562-010013283-03 Left Hand .286 (7.3mm) Diameter Through Axles Direct Release-Straight, Non-Handed/None, 1.71 X 1.63 (43.4mm X 41.3mm), Threaded 1/4-20 Normal Duty Catch Spring NoneA/A
0500113-202-21896-010116826-01 Left Hand .286 (7.3mm) Diameter Through Axles Direct Release L-Shaped, Right Hand, .80 X 1.12 (20.3 mm X 28.4 mm) Form Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-202-25062-010221529-01 Left Hand .286 (7.3mm) Diameter Through Axles Direct Release L-Shaped, Left Hand, 2.36 X 2.93 (59.9mm X 74.4mm) Normal Duty Catch Spring Heavy Duty Internal Trip Lever SpringA/A
0500113-206-11952-010011938-01 Left Hand M6 X 1.0 Direct Release L-Shaped, Left Hand, 3.24 X 1.97 (82.3 mm X 50.0 mm) Threaded 1/4-20 Normal Duty Catch Spring NoneA/A
0500113-206-21906-010119596-01 Left Hand M6 X 1.0 Direct Release L-Shaped, Right Hand Actuator, .41 X 1.28 X .51 (10.3mm X 32.5mm X 13.0mm) Form, No Holes Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-206-21907-010118096-02 Left Hand M6 X 1.0 Direct Release L-Shaped, Left Hand Actuator, .41 X 1.28 X .51 (10.3mm X 32.52mm X 12.9mm) Form, No Holes Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring A/CP
0500113-206-21918-010122537-01 Left Hand M6 X 1.0 Direct Release L-Shaped, Non Hand Actuator, 1.80 X 6.5 (45.8mm X 165mm) Holes Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-206-22536-010121451-01 Left Hand M6 X 1.0 Direct Release L-Shaped, Non-Handed, 1.80 X 1.57 X .21 Dia Hole (45.8mm X 40.0mm X 5.25mm), Spring Hole Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-206-27877-020127878-01 Left Hand M6 X 1.0 Direct Release L-Shaped, Left-Hand, .76 x 1.85 (19.41mm x 46.91mm), Spring Hole Heavy Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-206-29681-010129679-01 Left Hand M6 X 1.0 Direct Release L-Shaped, Left Hand, 1.18 x 2.36 (30mm x 60mm) Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
0500113-206-33986-010133985-01 Left Hand M6 X 1.0 Direct Release L-Shaped, Left Hand, with Tab, 67mm x 67mm x 35mm spring hole and 7mm hole for bolt Normal Duty Catch Spring Normal Duty Internal Trip Lever SpringA/A
©2018 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale