050-0214 Slimline Latch With Inline Trip Single-Position

This single rotor latch is a sub-platform to the TriMark proven 050-0200 series latch and is designed for light to medium-duty applications for on or off highway compartments and access panels. It features an inline trip mechanism for applications where it is desirable to have the release mechanism in-line with the latch and a single position latch.

    Designed For

    • Thinner, light or medium weight door applications requiring resistance to dust and vibration
    • Door weights up to 75 lbs. (34 kg)
    • Door seal pressures of 20-25 lbs. (9-11 kg) recommended for best results. Not to exceed 50 lbs. (23 kg)
    • Visible surface installation or concealed installation
    • Applications where it is desireable to have the release mechanism in line with the latch

    Available

    • Left or right hand configurations
    • With standard .265 (6.7mm) diameter "thru" axles as shown, 1/4-20 UNC threaded axles (optional) or M6 X 1.0 threaded axles

    Material

    • Internal latch components: heat treated smooth edge stamped steel
    • Springs: non-corrosive stainless steel
    • Case halves: high strength steel

    Installation

    • Three 1/4-20 UNC grade 5-type or M6 x 1 class 8.8 or better fasteners are recommended
    • Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt

    Internal Lubrication

    • Oven-cured dry lubricant is applied on all critical moving parts
    • Additional lubrication to be applied in the field if required

    Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.

    Typical Uses

    Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

    Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

    050-0214 Slimline Latch With Inline Trip Single-Position

    • Agricultural Tractor / Combine

      Access Panels

      Door Hold Open

      Engine Compartments / Hoods

      Exterior Storage Compartments


    • Bus / Motorcoach / Mass Transit

      Access Panels

      Baggage Doors

      Engine Compartments / Hoods


    • Construction - Heavy Earthmoving

      Access Panels


    • Construction - Lifting and Material Handling

      Access Panels

      Door Hold Open

      Engine Compartments / Hoods

      Exterior Storage Compartments


    • Construction - Light Earthmoving

      Access Panels

      Door Hold Open

      Engine Compartments / Hoods


    • Fire / Rescue / Ambulance / Emergency Vehicle

      Access Panels

      Exterior Storage Compartments


    • Heavy Truck / Sleeper Cabs

      Baggage Doors

      Engine Compartments / Hoods

      Exterior Storage Compartments

      Tool Boxes


    • Industrial Enclosure/Cabinet

      Access Panels/Cabinet Doors

      Exterior Storage Compartments


    • Motor Homes

      Baggage Doors

      Engine Compartments / Hoods


    • Replicars / Kit Cars

      Engine Compartments / Hoods


    • Step Van / Walk-in Vans / Delivery Vehicle

      Exterior Storage Compartments

      Tool Boxes


    • Trailers - Ranch / Farm / Cargo / Utility

      Access Panels

      Exterior Storage Compartments


    • Travel Trailer / 5th Wheel

      Baggage Doors


    • Utility Bodies / Wreckers / Specialty Truck

      Exterior Storage Compartments

      Tool Boxes


    Please specify search criteria:


    CompareCatalog NumberTriMark NumberHandingAxlesActuationActuation FeatureFinishStatus CodeCAD Drawing
    0500214-1-01-13847-2-01534609-01 Right Hand 1/4-20 Threaded Axles Straight, Right Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring Zinc plate/clear chromateA/A
    0500214-1-01-13847-2-11034609-02 Right Hand 1/4-20 Threaded Axles Straight, Right Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring COAT,MAGNI 565A/A
    0500214-1-06-13847-2-11020119-02 Right Hand M6 X 1.0 Threaded Axles Straight, Right Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring COAT,MAGNI 565A/A
    0500214-2-01-13846-2-01534608-01 Left Hand 1/4-20 Threaded Axles Straight, Left Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring Zinc plate/clear chromateA/A
    0500214-2-01-13847-2-11034608-02 Left Hand 1/4-20 Threaded Axles Straight, Right Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring COAT,MAGNI 565A/A
    0500214-2-06-13846-2-11020109-02 Left Hand M6 X 1.0 Threaded Axles Straight, Left Handed, 1.92 X .31 X .25 Dia Hole (48.8mm X 7.9mm X 6.4mm) Extension Spring COAT,MAGNI 565A/A
    0500214-2-06-20515-1-01520514-01 Left Hand M6 X 1.0 Threaded Axles L-Shaped Finger Release, Left Handed, 2.00 X 2.18 (50.9mm X 55.4mm) Torsion Spring Zinc plate/clear chromateA/A
    0500214-2-06-20741-1-01520435-01 Left Hand M6 X 1.0 Threaded Axles L-Shaped Finger Release, Left Handed, 4.47 X .86 (113.5mm X 21.9mm) Form Torsion Spring Zinc plate/clear chromateA/A
    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale