050-0413 Floating Striker Single Rotor Latch

This single rotor latch is a sub-platform to the TriMark proven 050-0400 series latch and is designed for medium to heavy-duty applications for on or off highway compartments and access panels. It features an internal trip mechanism for applications where it is desirable to have the release mechanism in-line with the latch and a single position latch.

Designed For

  • Medium to heavyweight doors for off-highway applications requiring resistance to vibration
  • Door thicknesses of 1-7/8" (47.6 mm) or greater
  • Door weights of 50-200 lbs. (23-91 kg)
  • Door seal pressure of up to 150 lbs. (< 50 lbs. suggested for best results)(23-68 kg)
  • Visible surface installation or concealed inside installation
  • Applications where it is desirable to have a single position rotary latch
  • Applications where is it desirable to have the release mechanism in-line with the latch

Features/Benefits

  • Allows for ± .060" (1.52mm) strike travel from .784" (19.91mm) locating dimension with the recommended .550 (13.9mm) diameter striker bolt (070-0201)
  • Ideal for applications with high vibration loading and where controlled travel between the latch and strike is characteristic of the application
  • Single position rotary style latching action

Finish

  • Zinc plated, clear chromate steel components

Internal Lubrication

  • Oven-cured dry lubricant is applied at factory on all critical moving parts 

Material

  • Internal latch components: heat treated, smooth edge stamped steel
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel

Installation

  • (4) 1/4-20 UNC grade 5 or M6 x 1 class 8.8 type fasteners are required (not included). Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13 N-m)
  • Fastener mounting holes diameter should not exceed .281" (7.1 mm)

Available
  • In left or right hand configurations (right hand shown) 
  • With (4) 1/4-20 UNC, M6 X 1 threaded axles or .286" thru axles
  • With trip lever options

Caution: Single position rotary latches do not comply with FMVSS 206 (ECE R11) requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0413 Floating Striker Single Rotor Latch

  • Agricultural Tractor / Combine

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Heavy Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


Please specify search criteria:


CompareCatalog NumberTriMark NumberHandingMountingActuationLatch Plate CutoutsFinishStatus CodeCAD Drawing
0500413-1-01-2092301CNTD-2201520925-01 Right Hand 1/4-20 UNC Catch release (20923-01) Front plate edge cutout + Back plate edge and end cutouts Zinc Plate/Clear ChromateA/A
0500413-1-01-5002301CNTD-2501551029-01 Right Hand 1/4-20 UNC Catch release (50023-01) Front plate edge and end cutouts + Back plate edge cutout Zinc Plate/Clear ChromateA/A
0500413-1-06-1256702CWKB-0108750245-02 Right Hand M6 X 1.0 Catch release, with knob (12567-02) Front plate edge cutout Black E-coatA/A
0500413-1-06-1256716CWKB-0101550245-01 Right Hand M6 X 1.0 Catch release, with knob (12567-16) Front plate edge cutout Zinc Plate/Clear ChromateA/A
0500413-1-06-3189201TLTH-2201540281-01 Right Hand M6 X 1.0 Lever release with extension spring return, .203" (5.16mm) hole (31892-01) Front plate edge cutout + Back plate edge and end cutouts Zinc Plate/Clear ChromateA/A
0500413-1-06-3488301TLT-2401534845-01 Right Hand M6 X 1.0 Lever/trip lever release with torsion spring return (34883-01) Front plate edge cutout + Back plate edge cutout with end tab Zinc Plate/Clear ChromateA/A
0500413-1-06-3522501TLTH-2401535223-01 Right Hand M6 X 1.0 Lever/trip lever release with torsion spring return, .232" (5.88mm) hole (35225-01) Front plate edge cutout + Back plate edge cutout with end tab Zinc Plate/Clear ChromateA/A
0500413-1-06-3728401LVRR-0601570444-01 Right Hand M6 X 1.0 Lever release (37284-01) Front plate edge cutout + Back plate edge cutout Zinc Plate/Clear ChromateA/A
0500413-1-06-5002301CNTD-2501550075-01 Right Hand M6 X 1.0 Catch release (50023-01) Front plate edge and end cutouts + Back plate edge cutout Zinc Plate/Clear ChromateA/A
0500413-1-06-5187001CNTD-2501551868-01 Right Hand M6 X 1.0 Catch release (51870-01) Front plate edge and end cutouts + Back plate edge cutout Zinc Plate/Clear ChromateA/A
0500413-2-06-2131001CESR-0401521312-01 Left Hand M6 X 1.0 Catch release with extension spring return (21310-01) Front plate edge and end cutouts Zinc Plate/Clear ChromateA/A
0500413-2-06-2131001CESR-0410121312-02 Left Hand M6 X 1.0 Catch release with extension spring return (21310-01) Front plate edge and end cutouts Black Magni CoatingA/A
0500413-2-06-2131101CESR-0401521313-01 Left Hand M6 X 1.0 Catch release with extension spring return (21310-01) Front plate edge and end cutouts Zinc Plate/Clear ChromateA/A
0500413-2-06-2131101CESR-0410121313-02 Left Hand M6 X 1.0 Catch release with extension spring return (21310-01) Front plate edge and end cutouts Black Magni CoatingA/A
0500413-2-06-2190401LWES-05-015-118693-03 Left Hand M6 X 1.0 Lever release with extension spring return, .256" (6.5mm) hole (21904-01) Back plate edge cutout Zinc Plate/Clear ChromateA/A
0500413-2-06-3522601TLT-2401535224-01 Left Hand M6 X 1.0 Lever/trip lever release with torsion spring return, .232" (5.88mm) hole (35226-01) Front plate edge cutout + Back plate edge cutout with end tab Zinc Plate/Clear ChromateA/A
0500413-2-06-3728501LVRR-0601570445-01 Left Hand M6 X 1.0 Lever release (37285-01) Front plate edge cutout + Back plate edge cutout Zinc Plate/Clear ChromateA/A
0500413-2-06-5007701CNTD-2501550076-01 Left Hand M6 X 1.0 Catch release (50077-01) Front plate edge and end cutouts + Back plate edge cutout Zinc Plate/Clear ChromateA/A
0500413-2-06-5187101CNTD-2501551869-01 Left Hand M6 X 1.0 Catch release (51871-01) Front plate edge and end cutouts + Back plate edge cutout Zinc Plate/Clear ChromateA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale