050-7100 10mm Single Rotor Latch

The compact 050-7100 10mm Single Rotor Latch is designed for operator and compartment door applications for off-highway vehicles.

Designed for

  • Light to medium duty doors up to 45 Kg (100 lbs.) with door seal pressures no greater than 11 Kg (25 lbs.)

Features/Benefits

  • Compact size and shape; requires minimum use of door space
  • Two position rotary function suitable for personnel doors for FMVSS 206 (ECE R11) applications
  • Inside release options 
  • Standard black finish reduces the need for secondary painting
  • One variant supplied with latch plastic cover 

Available

  • Versions are available to allow direct or remote actuation from exterior push button or paddle handles
  • With and without on latch direct release inside levers
  • With left and right variants; provides application flexibility (right hand shown)

 Material/Finish

  • Inside release components: Nylon or steel with nylon knob
  • Black plated steel case halves
  • Cam and catch: Heat treated steel

Use With

  • Latch Mounting Plate (included)
  • 070-7100 10mm Striker Pin

Installation 

  • Easy to install - recommended mounting fastener (2) M6 x 1.0 flat or oval head class 8.8 or better fasteners are required for FMVSS 206 (ECE R11) (not included)
  • Tighten to the fasteners recommended torque value, however, do not exceed 6 to 8 N-m (53-70 in-lbs.)
  • Latch mounting plate supplied, is required to meet FMVSS 206 (ECE R11) loads

Caution: Applications of this latch may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified within the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested with approved TriMark Striker Pin and Latch Mounting Plate in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) load requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Product does not meet the locking requirements for FMVSS 206 (ECE R11).

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-7100 10mm Single Rotor Latch

  • Agricultural Tractor / Combine

    Exterior Personnel Doors


  • Construction - Lifting and Material Handling

    Exterior Personnel Doors


  • Construction - Light Earthmoving

    Exterior Personnel Doors


  • Power Sports

    Exterior Personnel Doors


  • Replicars / Kit Cars

    Exterior Personnel Doors


Please specify search criteria:


CompareCatalog NumberTriMark NumberDescriptionStatus CodeCAD Drawing
0507100-106-00000-00000-104750-03Right Hand, M6 x 1.0 through axle mount, None, None, Yes, None,A/A
0507100-106-04704-00000-004700-03Right Hand,M6 x 1.0 through axle mount,Zinc Casting with Nylon Cover,None,None,NoneA/A
0507100-106-04704-04728-004760-03Right Hand,M6 x 1.0 through axle mount,Zinc Casting with Nylon Cover,Direct Push Button on latch Inside Release RH,None,NoneA/A
0507100-106-05051-04728-005050-03Right Hand,M6 x 1.0 through axle mount,Lever Handle L Shape GFN,Direct Push Button on latch Inside Release RH,None,NoneA/A
0507100-106-05051-05066-007030-03Right Hand,M6 x 1.0 through axle mount,Lever Handle L Shape GFN,Cable / Rod 4mm on latch Inside Release RH,None,NoneA/A
0507100-106-05756-00000-005755-03Right Hand,M6 x 1.0 through axle mount,Lever Handle GFN,None,None,NoneA/A
0507100-106-07571-04728-107575-03Right Hand,M6 x 1.0 through axle mount,Gas Injected Nylon 6,Direct Push Button on latch Inside Release RH,Yes,NoneA/A
0507100-106-40704-00000-014720-03Right Hand, M6 x 1.0 through axle mount, Zinc Casting with Nylon Cover, None, None, YesA/A
0507100-206-04704-00000-004705-03Left Hand,M6 x 1.0 through axle mount,Zinc Casting with Nylon Cover,None,None,NoneA/A
0507100-206-04704-04723-004765-03Left Hand,M6 x 1.0 through axle mount,Zinc Casting with Nylon Cover,Direct Push Button on latch Inside Release LH,None,NoneA/A
0507100-206-04704-04723-014725-03Left Hand,M6 x 1.0 through axle mount,Zinc Casting with Nylon Cover,Direct Push Button on latch Inside Release LH,None,YesA/A
0507100-206-04704-05535-004755-03Left Hand,M6 x 1.0 through axle mount,Zinc Casting with Nylon Cover,Direct Push rod on latch release LH,None,NoneA/A
0507100-206-05051-04723-005055-03Left Hand,M6 x 1.0 through axle mount,Lever Handle L Shape GFN,Direct Push Button on latch Inside Release LH,None,NoneA/A
0507100-206-05051-05061-007035-03Left Hand,M6 x 1.0 through axle mount,Lever Handle L Shape GFN,Cable / Rod 4mm on latch Inside Release LH,None,NoneA/A
0507100-206-07571-04723-107570-03Left Hand,M6 x 1.0 through axle mount,Gas Injected Nylon 6,Direct Push Button on latch Inside Release LH,Yes,NoneA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale