• Home
  • Products
  • Europe Distribution Parts

050-0107 Two-Rotor Latch With Coaxial Trip


Designed For:

  • Medium to heavy weight doors for on or off-highway applications
  • Door thicknesses of 1-7/8" (47.6mm) or greater
  • Door weights of 50-200 lbs. (23-91kg)
  • Door seal pressures of 50-150 lbs. (23-68kg) (suggested for best results)
  • Applications where it is desireable to provide additional support to the trip lever

Material:

  • Internal latch components: heat treated, smooth edge stamped steel
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel springs

Finish:

  • Zinc plated, yellow chromate steel components

Internal Lubrication:

  • Oven-cured dry lubricant is applied at factory all critical moving parts

Use With:

Installation:

  • Four M6 X 1 grade 8.8-type fasterners are required (not included). Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m)
  • Fastener mounting hole diameter should not exceed .281" (7.1mm)
  • Two position, double rotor latches comply with FMVSS 206 in primary and secondary latching positions when tested with approved TriMark FMVSS 206 compliant striker bolts in accordance with SAE J839.
Part Number Handing Mounting Actuation Knob Option Actuation Feature PB Actuator SKU Number
16527-01 Right hand M6 X 1.0 Conventional-straight, RH coaxial actuator, 2.000 (50.8mm) Knob (1) Torsion spring Yes 0500107-106-15010-111
18573-01 Right hand M6 X 1.0 Conventional-straight, RH coaxial actuator, 2.000 (50.8mm)e Knob (1) Torsion spring Yes 0500107-206-16010-111
©2016 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale