• Home
  • Products
  • Europe Distribution Parts

050-0200 Slimline Rotary Latch


Designed For:

  • Thinner, light or medium weight door applications
  • Door weights up to 75 lbs. (34kg)
  • Door seal pressures of 20-25 lbs. (9-11kg) recommended for best results (not to exceed 50 lbs - 23kg))
  • Visible surface or concealed installation

Material:

  • Internal latch components: heat treated, smooth edge stamped steel
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel springs

Finish:

  • Zinc plated, yellow chromate steel components
  • Stainless steel

Installation:

  • Three M6 X 1 class 8.8 or better fasteners are recommended
  • Vertical mounting with support ramp at top is required for proper alignment and subsequent engagement of locking pawl and striker bolt
  • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)

Use With:

Internal Lubrication:

  • Oven-cured dry lubricant is applied at factory on all critical moving parts
  • Two position rotor latches comply with FMVSS 206 in primary and secondary latching positions when tested with approved TriMark striker bolts in accordance with SAE J839.
Part Number Handing Mounting Actuation Actuation Feature SKU Number
19275-01 Left hand M6 X 1.0 threaded axles Conventional 2-point, non-handed, v01 - 1.25 (31.8mm), 0.625 X 1.083 (9.9mm X 27.5mm), stop No actuation feature 0500200-206-20012-0
19276-01 Right hand M6 X 1.0 threaded axles Conventional 2-point, non-handed, v01 - 1.25 (31.8mm), 0.625 X 1.083 (9.9mm X 27.5mm), stop No actuation feature 0500200-106-20012-0
©2016 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale