030-1850 Flush Mounted Paddle Handle-Rigid Locking

This flush mounted paddle handle with rigid locking paddle is a redesign of our popular 030-0850 Flush Mounted Paddle Handle. With a modernized look, it can be used in FMVSS 206 (ECE R11) applications, is power lockable and features a 4-point pivot plate and lock cam actuation.

Designed for

  • Medium to heavy duty on-highway vehicle entrance doors
  • Off-highway applications--construction, mining, forestry and agricultural
  • On-highway--emergency vehicles

Features/Benefits

  • Automotive styling preferred by customers in the ambulance and fire truck market
  • Multiple connection points for use on inside lock and power lock actuation
  • Easy installation--do not have to maneuver large pivot plate through cut-out in the door
  • Molded rubber housing gasket and o-rings on the axle for better water infiltration resistance
  • Non-slip tape added for secure opening of the door

Material

  • Paddle and housing: sturdy die cast zinc alloy
  • Pivot components: heat-treated, mild steel for wear resistance
  • Bushing for paddle axle and thrust washer for pivot plate: Nylon 6/6

Finish

  • Available in a variety of finishes including black powder coated, high quality buffed CNNC chrome or a combination of black/chrome finish

Available

  • Left and right hand configurations
  • Includes gasket for flange of housing to provide resistance to water and dirt infiltration
  • Handle can keyed to match other TriMark door products with KeyOne Plus for a single-key system, keyed alike or provided non-locking
  • Customized bezel/trim for unique look for customers with the request of an added logo
    • Bezel kits sold separately (part number 36784)


Installation

  • Design provides for easy installation without a mounting bracket with the use of (6) #8-32 fasteners
  • Can be installed in a wide range of locations in door - either horizontal or vertical orientation (left hand shown)
  • Installs into current 030-0850 cut-outs
  • Door skin thickness- .083"-.127" (2.11mm-3.22mm)

Design Patent No. D694,087

U.S. Patent No. 10,024,085

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Applications of this product may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified with the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-1850 Flush Mounted Paddle Handle-Rigid Locking

  • Agricultural Tractor / Combine

    Access Panels

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Exterior Storage Compartments


  • Armored Vehicle

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Personnel Doors


  • Bus / Motorcoach / Mass Transit

    Access Panels

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Compartments


  • Construction - Heavy Earthmoving

    Access Panels

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Compartments


  • Construction - Light Earthmoving

    Access Panels

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Compartments


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Access Panels

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Compartments


  • Heavy Truck / Sleeper Cabs

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Exterior Storage Compartments


  • Industrial Enclosure/Cabinet

    Exterior Storage Compartments


  • Motor Homes

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Personnel Doors


  • Replicars / Kit Cars

    Engine Compartments / Hoods

    Exterior Personnel Doors


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Compartments


  • Trailers - Ranch / Farm / Cargo / Utility

    Cargo Doors

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Compartments


  • Travel Trailer / 5th Wheel

    Baggage Doors

    Exterior Personnel Doors

    Interior Compartments


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments


Please specify search criteria:

 

  • Handing :

 

  • Finish :

 

  • Key Type (Head Configuration) :

 

  • Key Type (Color) :

 

  • Key Type (Logo) :

 

  • Keying :

 

  • Keying (Lock Cylinder Part Number) :

 

  • Keying (Keys Supplied) :

 

  • Keying (Key Part Number) :

 

  • Keying (Number of Keys per PN) :

 

  • Pivot Plate :

 

  • Paddle logo :

©2025 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale