010-0600 Flush Mounted Pop-up T-Handle

This handle was designed for toppers, liftgate and baggage doors where 1/4 turn cam locking is desired. It features a low profile handle that pops up when actuated for ease of use and is available in several rotations, drive bar lengths and finishes.

Designed For

  • Toppers and liftgate doors, garage doors, storage and access doors
  • Any application where low profile hardware is important

Features/Benefits

  • Flush mounted - when "T" handle is depressed, rivets and fastener heads are concealed
  • Rubber gasket under base provides resistance to water infiltration

Available

  • Key lockable with 50 key codes available or keyed alike. Non-locking version is also available
  • One or two point locking
  • 90° or 150° rotation
  • 2.500" (63.5mm) or 3.500" (88.9mm) drive bar lengths
  • Clockwise or counterclockwise rotation

Material

  • Shuttered keyway: Stainless steel
  • All major components: Zinc alloy
  • Drive bar: Zinc plated steel
  • Internal (2) springs: Stainless steel

Finish

  • Black powder coated or white

Installation

  • Easy installation with (2) #10 fasteners or rivets
  • Recommended door mounting - 1.125" (28.6mm) diameter thru hole 

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Use With
Throw Rods

  • Available in sturdy .312" (5/16") diameter cut, shaped and formed to your specific length
  • Finished in bright zinc plated steel
  • Support brackets included
  • Can be ordered separately or pre-assembled to inside release lever
  • Minimum order quantities will apply

Inside Release Lever

  • Available with rods and inside release lever fully assembled and ready to install or shipped bulk with components separate for you to assemble at your plant

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

010-0600 Flush Mounted Pop-up T-Handle

  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Baggage Doors


  • Pick-up Truck - Tool Boxes / Topper / Tonneau

    Tool Boxes

    Topper / Tonneau


  • Power Sports

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Tool Boxes


  • Travel Trailer / 5th Wheel

    Baggage Doors


Please specify search criteria:


CompareCatalog NumberTriMark NumberRotationFinishKey Type (Head Configuration)Key Type (Color)Key Type (Logo)KeyingKeying (Lock Cylinder Part Number)Keying (Keys Supplied)Keying (Key Part Number)Keying (Number of Keys per PN)DegreeDrive Bar LengthGasket ThicknessHandles Per PNDrive Bar ThreadStatus CodeSample RequestCAD Drawing
0100600-1-037-00-00-00-00-14080.04-0-0-0-1-1-1-1-011739-37 Clockwise Low Gloss Black No key No key No key Non-locking or N/A LKCYL,NLKG No NA 0 keys 90 Degree 3.5 (88.9mm) .062 (1.6mm) 1 NAA/A
0100600-1-037-00-00-00-00-14080.04-0-0-0-1-2-1-1-011739-03 Clockwise Low Gloss Black No key No key No key Non-locking or N/A LKCYL,NLKG No NA 0 keys 90 Degree 2.5 (63.5mm) .062 (1.6mm) 1 NAA/A
0100600-1-037-02-03-02-02-14080.01-1-0-2-1-1-1-1-011738-07 Clockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS800,CH545S,2 KEYS Yes NA 2 keys on ring 90 Degree 3.5 (88.9mm) .062 (1.6mm) 1 NAA/A
0100600-1-037-02-03-02-02-14080.03-1-0-2-1-1-1-1-011738-37 Clockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS100,TM911,2 KEYS Yes NA 2 keys on ring 90 Degree 3.5 (88.9mm) .062 (1.6mm) 1 NAA/A
0100600-1-037-02-03-02-02-14080.03-1-0-2-1-2-1-1-011738-06 Clockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS100,TM911,2 KEYS Yes NA 2 keys on ring 90 Degree 2.5 (63.5mm) .062 (1.6mm) 1 NAA/A
0100600-1-037-02-03-02-02-14080.03-1-0-2-1-3-1-1-111738-04 Clockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS100,TM911,2 KEYS Yes NA 2 keys on ring 90 Degree 2.5 (63.5mm) Threaded .062 (1.6mm) 1 5/16-18 UNC-2AA/A
0100600-1-037-02-03-02-02-14080.03-1-0-2-2-1-1-1-013946-02 Clockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS100,TM911,2 KEYS Yes NA 2 keys on ring 150 Degree 3.5 (88.9mm) .062 (1.6mm) 1 NAA/A
0100600-1-037-02-03-02-04-14080.05-1-0-2-1-1-1-1-011738-05 Clockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed random LKCYL,TD,KS100,TM901-950,2 KEYS Yes NA 2 keys on ring 90 Degree 3.5 (88.9mm) .062 (1.6mm) 1 NAA/A
0100600-1-037-02-03-02-04-14080.05-1-0-2-1-2-1-1-011738-03 Clockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed random LKCYL,TD,KS100,TM901-950,2 KEYS Yes NA 2 keys on ring 90 Degree 2.5 (63.5mm) .062 (1.6mm) 1 NAA/A
0100600-1-037-02-03-02-04-14080.05-1-0-2-2-1-0-1-013946-01 Clockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed random LKCYL,TD,KS100,TM901-950,2 KEYS Yes NA 2 keys on ring 150 Degree 3.5 (88.9mm) NA 1 NAA/A
0100600-1-037-02-03-02-04-14080.05-1-0-2-2-2-1-1-013946-04 Clockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed random LKCYL,TD,KS100,TM901-950,2 KEYS Yes NA 2 keys on ring 150 Degree 2.5 (63.5mm) .062 (1.6mm) 1 NAA/A
0100600-1-074-02-03-02-02-14080.03-1-0-2-1-1-1-1-011738-11 Clockwise Sky White Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS100,TM911,2 KEYS Yes NA 2 keys on ring 90 Degree 3.5 (88.9mm) .062 (1.6mm) 1 NAA/A
0100600-2-037-00-00-00-00-14080.04-0-0-0-1-3-1-1-122457-01 Counterclockwise Low Gloss Black No key No key No key Non-locking or N/A LKCYL,NLKG No NA 0 keys 90 Degree 2.5 (63.5mm) Threaded .062 (1.6mm) 1 5/16-18 UNC-2AA/A
0100600-2-037-02-03-02-02-14080.01-1-0-2-1-3-1-1-112466-04 Counterclockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-locking or N/A LKCYL,TD,KS800,CH545S,2 KEYS Yes NA 2 keys on ring 90 Degree 2.5 (63.5mm) Threaded .062 (1.6mm) 1 5/16-18 UNC-2AA/A
0100600-2-037-02-03-02-04-14080.02-1-0-2-1-1-1-1-012466-06 Counterclockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed random LKCYL,TD,KS100,TM901-950,2 KEYS Yes NA 2 keys on ring 90 Degree 3.5 (88.9mm) .062 (1.6mm) 1 NAA/A
0100600-2-037-02-03-02-04-14080.05-1-0-2-1-1-2-1-012051-02 Counterclockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed random LKCYL,TD,KS100,TM901-950,2 KEYS Yes NA 2 keys on ring 90 Degree 3.5 (88.9mm) .125 (3.18mm) 1 NAA/A
0100600-2-037-02-03-02-04-14080.05-1-0-2-1-2-2-1-012466-05 Counterclockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed random LKCYL,TD,KS100,TM901-950,2 KEYS Yes NA 2 keys on ring 90 Degree 2.5 (63.5mm) .125 (3.18mm) 1 NAA/A
0100600-2-037-02-03-02-04-14080.05-1-0-2-1-3-1-1-112466-37 Counterclockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed random LKCYL,TD,KS100,TM901-950,2 KEYS Yes NA 2 keys on ring 90 Degree 2.5 (63.5mm) Threaded .062 (1.6mm) 1 5/16-18 UNC-2AA/A
0100600-2-037-02-03-02-04-14080.05-1-0-2-2-1-2-1-012051-37 Counterclockwise Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed random LKCYL,TD,KS100,TM901-950,2 KEYS Yes NA 2 keys on ring 150 Degree 3.5 (88.9mm) .125 (3.18mm) 1 NAA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale