030-0150 Heavy Duty Compartment Latch

This compartment latch was specifically designed for Caterpillar’s heavy-duty off-highway vehicle storage and compartment door applications. This product features a reinforced mounting surface as well as an integrated rotary latch for ease of installation and use.

索取样品

Designed For

On or off-highway vehicle applications -- construction, mining, agricultural

Features/Benefits

Steel reinforced mounting plate provides a higher resistance to vibration

Finish

Clear chromate, ready to paint

Internal Lubrication

Oven-cured dry lubricant is applied on all critical moving parts

Installation

5mm diameter fasteners

Application Recommendations

Striker bolt installation should allow for a minimum radial movement of .060 [1.524]
Rubber bumpers or door seals are recommended to reduce effects of vibration stress on door and latch system

Available

Keyed alike with shuttered keyway, CAT key 5P8500
With single and two position rotors

Material

Housing and paddle: die cast zinc alloy
Other components: zinc plated, mild steel
Internal latch components: case hardened, smooth edge stamped steel

Latch & Striker Installation

Install striker bolt in door frame
Close door carefully and check for interference between head of striker bolt and latch components
Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
Adjust striker bolt vertically so door is not guided upward or downward while being closed
CHECK TO DETERMINE THAT BOTH SECONDARY AND PRIMARY LATCH POSITIONS ARE USABLE
Door should be latched but not "closed" in secondary position and latched to anticipated "closed" position with respect to adjacent surfaces in primary position
If both primary and secondary positions are not evident, readjust striker bolt

Caution: Compartment latch does not meet FMVSS 206 load requirements.