050-7130 10mm Single Rotor Latch with Direct Squeeze Release

The compact 050-7130 10mm Single Rotor Latch with Direct Squeeze Release is designed for operator and compartment door applications for off-highway vehicles that require a remote interior release. Similar to the 050-7120, this 10mm Single Rotor Latch with Direct Squeeze Release allows inside squeeze release integration into the customer door tubing.

Designed for

  • Light to medium duty doors up to 45 Kg (100 lbs.) with door seal pressures no greater than 11 Kg (25 lbs.)

Features/Benefits

  • Compact size and shape; requires minimum use of door space
  • Two position rotary function suitable for personnel doors for FMVSS 206 (ECE R11) applications
  • Standard black finish reduces the need for secondary painting
  • Robust designed remote inside release is able to be incorporated into customers door tubing
  • Provides for greater ease of operation

Available

  • Versions are available to allow direct or remote actuation from exterior push button or paddle handles
  • With left and right variants; provides application flexibility (right hand shown)

 Material/Finish

  • Inside release components: Nylon
  • Black plated steel case halves
  • Cam and catch: Heat treated steel

Installation 

  • Easy to install - recommended mounting fastener (2) M6 x 1.0 flat or oval head class 8.8 or better fasteners are required for FMVSS 206 (ECE R11) (not included)
  • Tighten to the fasteners recommended torque value, however, do not exceed 6 to 8 N-m (53 to 70 in-lbs.)
  • Latch mounting plate supplied, is required to meet  FMVSS 206 (ECE R11) loads

Use With

  • Latch Mounting Plate (included)
  • 070-7100 10mm Striker Pin

Applications of this latch may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirement are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified within the Standard. 

Note that this 050-7130 10m Single Rotor Latch Squeeze Release complies with FMVSS 206 (ECE R11) when tested with approved TriMark Striker Pin and Latch Mounting Plate in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) load requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Individual part dimensions are for reference only. Refer to individual part dimensions for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Product does not meet the locking requirements for FMVSS 206
(ECE R11).

 

 

 

典型用途

典型应用用途图解按照行业/系统组织,目的在于给予用户指定采用TriMark产品的完整系统的一些思路。

不是所有行业/系统应用都具有典型用途图解。如果你的特定应用没有典型应用图解,请提交一份产品技术信息请求,我们的一位技术代表可以帮助您选择一个适用于您的特定应用的产品解决方案。

050-7130 10mm Single Rotor Latch with Direct Squeeze Release

  • 农用拖拉机/联合收割机

    外部人员进出门


  • 施工 – 起重和材料搬运

    外部人员进出门


  • 施工 – 轻型掘土机械

    外部人员进出门


  • 施工 – 重型掘土机械

    外部人员进出门


请设置过滤条件:


©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale