030-0150 Heavy Duty Compartment Latch

This compartment latch was specifically designed for Caterpillar’s heavy-duty off-highway vehicle storage and compartment door applications. This product features a reinforced mounting surface as well as an integrated rotary latch for ease of installation and use.

 

 


Designed For

  • On or off-highway vehicle applications -- construction, mining, agricultural

Features/Benefits

  • Steel reinforced mounting plate provides a higher resistance to vibration

Finish

  • Clear chromate, ready to paint

Internal Lubrication

  • Oven-cured dry lubricant is applied on all critical moving parts

Installation

  • 5mm diameter fasteners

Application Recommendations

  • Striker bolt installation should allow for a minimum radial movement of .060 [1.524]
  • Rubber bumpers or door seals are recommended to reduce effects of vibration stress on door and latch system





Available

  • Keyed alike with shuttered keyway, CAT key 5P8500
  • With single and two position rotors

Material

  • Housing and paddle: die cast zinc alloy
  • Other components: zinc plated, mild steel
  • Internal latch components: case hardened, smooth edge stamped steel

Latch & Striker Installation

  • Install striker bolt in door frame
  • Close door carefully and check for interference between head of striker bolt and latch components
  • Add or remove shims under striker bolt washer as required (outside diameter of shim should be larger than outside diameter of striker bolt washer)
  • Adjust striker bolt vertically so door is not guided upward or downward while being closed
  • CHECK TO DETERMINE THAT BOTH SECONDARY AND PRIMARY LATCH POSITIONS ARE USABLE
  • Door should be latched but not "closed" in secondary position and latched to anticipated "closed" position with respect to adjacent surfaces in primary position
  • If both primary and secondary positions are not evident, readjust striker bolt

Caution: Compartment latch does not meet FMVSS 206 load requirements.

典型用途

典型应用用途图解按照行业/系统组织,目的在于给予用户指定采用TriMark产品的完整系统的一些思路。

不是所有行业/系统应用都具有典型用途图解。如果你的特定应用没有典型应用图解,请提交一份产品技术信息请求,我们的一位技术代表可以帮助您选择一个适用于您的特定应用的产品解决方案。

030-0150 Heavy Duty Compartment Latch

  • 施工 – 起重和材料搬运

    检修面板

    外部储物舱


  • 施工 – 轻型掘土机械

    检修面板

    外部储物舱


  • 施工 – 重型掘土机械

    检修面板

    外部储物舱


请设置过滤条件:


    ©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale