050-0275 Slimline Cargo Latch

This compact single rotor latch is designed for light duty applications for on-road utility cargo doors. This latch is not designed to comply with FMVSS 206 (ECE R11) requirements.

   

Designed For

  • Walk-in cargo doors on the back of vehicle with latch locations at top and bottom of door
  • Thin, light weight door applications
  • Door weights up to 75 lbs. (34 kg)
  • Door seal pressures of 20-25 lbs. (9-11 kg) recommended for best results
  • Non FMVSS 206 (ECE R11) applications

Features/Benefits

  • Compact size allows for more head clearance in a cargo door application
  • The case design allows the latch to be mounted closer to the door top and bottom edge for non-protruding striker details
  • Allows for use with a hoop type striker (not available at this time -- please inquire)

Available

  • Left or right hand configurations (left hand shown)
  • With 1/4-20 axles as shown or (optional) .265" "thru" axles or M6 x 1.0 threaded axles
  • Other actuation levers are available -- please inquire

Internal Lubrication

  • Oven-cured dry lubricant is applied on all critical moving parts

   

Material

  • Internal latch components: Heat treated, smooth edge stamped steel
  • Springs: Non-corrosive stainless steel
  • Case halves: High strength steel

Finish

  • Zinc plated, clear chromate steel components
  • Stainless steel springs

Installation

  • (2) 1/4-20 UNC or M6 x 1.0 fasteners are recommended
  • Tighten to the fastener manufactures' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)

Caution: Latch does not meet FMVSS 206 (ECE R11) load requirements.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0275 Slimline Cargo Latch

  • Bus / Motorcoach / Mass Transit

    Access Panels

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Interior Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Interior Compartments


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Access Panels

    Exterior Storage Compartments

    Interior Compartments


  • Heavy Truck / Sleeper Cabs

    Baggage Doors

    Exterior Storage Compartments

    Glove Boxes

    Interior Compartments

    Tool Boxes


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Baggage Doors

    Gloves Boxes

    Interior Compartments


  • Pick-up Truck - Tool Boxes / Topper / Tonneau

    Tool Boxes

    Topper / Tonneau


  • Power Sports

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Tool Boxes


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Storage Compartments

    Interior Compartments

    Tool Boxes


  • Trailers - Ranch / Farm / Cargo / Utility

    Access Panels

    Cargo Doors

    Exterior Storage Compartments

    Interior Compartments


  • Travel Trailer / 5th Wheel

    Baggage Doors

    Interior Compartments


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments

    Tool Boxes


Please specify search criteria:


CompareCatalog NumberTriMark NumberDescriptionStatus CodeSample RequestCAD Drawing
0500275-2-06-29912-029917-01Left Hand,M6 X 1.0 Threaded Axles,LH, 1.57x.25x1.25x.25 Dia Hole,NoneA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale