050-0500 Single Rotor Mini Latch

Designed for small compartment and access doors where low cost slam action latching is desired. It features a single or two position compact rotary and is available in a variety of trip levers and mounting axles for ease of mounting and applications

 

 

Designed For

  • Pickup box lids and cross bed tool boxes
  • Light weight door applications
  • RV baggage doors
  • Door closing forces of 15-20 lbs. (6.8-9 kg) recommended for best results. (not to exceed 50 lbs. (23 kg)
  • Release efforts are approximately proportional to door closing forces striker bolt load
  • Use with TriMark 070-0300 Striker Bolt

Features/Benefits

  • Compact size
  • Low cost
  • Single position rotary style latching action
  • Double position also available

Available

  • Right and left hand configurations (left hand shown)
  • With (2) 1/4-20 UNC threaded axles
  • Base mount
  • With rod collars attached

Material

  • Internal latch components and case halves: High-strength steel
  • Springs: Non-corrosive stainless steel

Finish

  • Zinc plated, clear chromate
  • Stainless steel

Installation

  • (2) 1/4-20 UNC mounting fasteners (not included)
  • Custom mounting brackets and release levers upon request
  • Tighten to the manufacturers' recommended torque value, however, do not exceed 100 in-lbs. (11.2 N-m)


Note: Rod collars are not intended or recommended for use in applications that require FMVSS 206 (ECE R11) compliance or applications that have heavy or extreme striker bolt loads (> 25 lbs./ 11 kg) and/or high to extreme usage (> 100,000 door cycles/life).

CAUTION: Latch does not meet FMVSS 206 (ECE R11) load requirements.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0500 Single Rotor Mini Latch

  • Agricultural Tractor / Combine

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Bus / Motorcoach / Mass Transit

    Access Panels

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Heavy Earthmoving

    Engine Compartments / Hoods


  • Construction - Lifting and Material Handling

    Access Panels

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Access Panels

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Access Panels

    Exterior Storage Compartments


  • Heavy Truck / Sleeper Cabs

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Tool Boxes


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Baggage Doors

    Engine Compartments / Hoods


  • Pick-up Truck - Tool Boxes / Topper / Tonneau

    Tool Boxes

    Topper / Tonneau


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Storage Compartments

    Tool Boxes


  • Trailers - Ranch / Farm / Cargo / Utility

    Access Panels

    Exterior Storage Compartments

    Interior Compartments


  • Travel Trailer / 5th Wheel

    Baggage Doors


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments

    Tool Boxes


Please specify search criteria:


CompareCatalog NumberTriMark NumberHandingMountingActuationMaterial and FinishRotorsCollarsStatus CodeSample RequestCAD Drawing
0500500-101-13384-0151013374-01 Right Hand 1/4-20 UNC Threaded Axles Conventional L-Shaped 4-Point, Non-Handed, .50 X .120, .237 Dia Cold Rolled Steel - Zinc Clear Chromate Single Position NoneA/A
0500500-101-14974-0151014713-01 Right Hand 1/4-20 UNC Threaded Axles Conventional 2-Point, Non-Handed, .50 X 1.12 X .237 Dia, 35 Deg Cold Rolled Steel - Zinc Clear Chromate Single Position NoneA/A
0500500-101-16387-0152016388-01 Right Hand 1/4-20 UNC Threaded Axles Slotted L-Shaped 1-Point, Non-Handed, 1.156 X 1.156, .203 Dia Cold Rolled Steel - Zinc Clear Chromate Two Position NoneA/A
0500500-101-23097-0151024000-01 Right Hand 1/4-20 UNC Threaded Axles Conventional L-Shaped 1-Point, Right Hand, 1.19 X .51 Offset X .236 Dia Cold Rolled Steel - Zinc Clear Chromate Single Position NoneA/A
0500500-102-15250-0151015252-01 Right Hand 0.286 (7.3mm) Diameter Through Axles Conventional 1-Point, Right Hand Lever, 0.560 X 1.000 X 0.440 Offset Cold Rolled Steel - Zinc Clear Chromate Single Position NoneA/A
0500500-201-13384-0151013776-01 Left Hand 1/4-20 UNC Threaded Axles Conventional L-Shaped 4-Point, Non-Handed, .50 X .120, .237 Dia Cold Rolled Steel - Zinc Clear Chromate Single Position NoneA/A
0500500-201-14974-0151014712-01 Left Hand 1/4-20 UNC Threaded Axles Conventional 2-Point, Non-Handed, .50 X 1.12 X .237 Dia, 35 Deg Cold Rolled Steel - Zinc Clear Chromate Single Position NoneA/A
0500500-201-16387-0152016389-01 Left Hand 1/4-20 UNC Threaded Axles Slotted L-Shaped 1-Point, Non-Handed, 1.156 X 1.156, .203 Dia Cold Rolled Steel - Zinc Clear Chromate Two Position NoneA/A
0500500-201-21102-0152021455-01 Left Hand 1/4-20 UNC Threaded Axles Conventional 1-Point, Left Hand, 1.12 X .25 Offset X .265 Dia. hole Cold Rolled Steel - Zinc Clear Chromate Two Position NoneA/A
0500500-201-23098-0151024001-01 Left Hand 1/4-20 UNC Threaded Axles Conventional L-Shaped 1-Point, Left Hand, 1.19 X .51 Offset X .236 Dia Cold Rolled Steel - Zinc Clear Chromate Single Position NoneA/A
0500500-202-17257-0151017256-01 Left Hand 0.286 (7.3mm) Diameter Through Axles Conventional 2-Point, Non-Handed, .79 X 1.50 X .237 Dia Cold Rolled Steel - Zinc Clear Chromate Single Position NoneA/A
0500500-202-22489-0151022490-01 Left Hand 0.286 (7.3mm) Diameter Through Axles Conventional 1-Point, Left Hand Lever, 1.21 X .55 Offset Cold Rolled Steel - Zinc Clear Chromate Single Position NoneA/A
©2020 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale