030-1400 Paddle Handle

This flush mounted paddle is a redesign of our 030-0400 paddle handle for entrance doors on recreational and specialty vehicles. Containing the same proven mechanical details as previous with a modernized look, it can be used in FMVSS 206 (ECE R11) applications and features a remote pivot plate and lock cam actuation.

Features/Benefits

  • Offers updated styling
  • Inside lock provides override if outside paddle should be locked
  • Molded rubber gasket for flange of housing provides resistance to water and dust infiltration

Finish

  • Standard black powder coated, buffed copper-nickel-nickel-chrome plated or combination black powder coated housing and buffed chrome paddle

Available

  • Lock can be keyed to match other TriMark door products with KeyOne Plus for a single-key system, keyed alike or provided non-locking
  • Several pivot plate options are available to suit a wide variety of applications

Material

  • Sturdy zinc die cast alloy housing and paddle
  • Steel components: Zinc plated, mild steel


 Installation

  • Handle is easy to install with supplied single 1/4-20 UNC nut and mounting bracket (mounting torque not to exceed 30 in-lbs (3.39 N-m)
  • Either handed version can be installed in a wide range of locations in both horizontal or vertical orientations (left hand shown)
  • Retrofits with most 030-0400 flush paddle handles

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Applications of this product may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified with the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-1400 Paddle Handle

  • Construction - Lifting and Material Handling

    Exterior Personnel Doors


  • Construction - Light Earthmoving

    Exterior Personnel Doors


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Exterior Personnel Doors


  • Motor Homes

    Exterior Personnel Doors


  • Power Sports

    Exterior Personnel Doors


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Personnel Doors


  • Trailers - Ranch / Farm / Cargo / Utility

    Exterior Personnel Doors


  • Travel Trailer / 5th Wheel

    Exterior Personnel Doors


Please specify search criteria:

 

  • Key Type (Head Configuration) :

 

  • Key Type (Color) :

 

  • Key Type (Logo) :

 

  • Keying :

 

  • Keying (Lock Cylinder Part Number) :

 

  • Keying (Keys Supplied) :

 

  • Keying (Key Part Number) :

 

  • Keying (Number of Keys per PN) :

CompareCatalog NumberTriMark NumberKey Type (Head Configuration)Key Type (Color)Key Type (Logo)KeyingKeying (Lock Cylinder Part Number)Keying (Keys Supplied)Keying (Key Part Number)Keying (Number of Keys per PN)Status CodeSample RequestCAD Drawing
0301400-1-037-00-00-00-16-0-0-0-0-03-4-4-122660-18 No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, without plug NA No NA 0 keysA/A
0301400-1-037-01-03-02-02-31684.01-1-16169.02.2001-1-03-4-2-122660-07 Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 keyA/A
0301400-1-037-01-03-02-02-31684.01-1-16169.02.2001-2-03-4-1-122660-16 Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 2 keys on ringA/A
0301400-1-037-01-03-02-03-16014.14.1000-1-0-2-06-4-2-122668-01 Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS101,1091-1140,IP,2 KEYS Yes NA 2 keys on ringA/A
0301400-1-037-01-03-02-03-16014.14.1000-1-0-2-07-4-1-122660-04 Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS101,1091-1140,IP,2 KEYS Yes NA 2 keys on ringA/A
0301400-1-063-01-03-02-02-16014.02.2001-1-16169.02.2001-1-03-2-1-122660-05 Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 keyA/A
0301400-1-099-01-03-02-02-16014.02.2001-1-16169.02.2001-1-03-4-1-122660-06 Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 keyA/A
0301400-1-099-01-03-02-03-16014.14.1000-1-0-2-03-4-1-122660-03 Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS101,1091-1140,IP,2 KEYS Yes NA 2 keys on ringA/A
0301400-2-037-00-00-00-16-0-0-0-0-04-4-4-122659-11 No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, without plug NA No NA 0 keysA/A
0301400-2-037-01-03-02-02-16014.02.2001-1-16169.02.2001-1-04-4-1-122659-04 Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 keyA/A
0301400-2-037-01-03-02-02-31684.01-1-16169.02.2001-2-04-4-1-122659-08 Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 2 keys on ringA/A
0301400-2-037-01-03-02-03-16014.14.1000-1-0-2-04-4-1-122659-01 Large Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS101,1091-1140,IP,2 KEYS Yes NA 2 keys on ringA/A
0301400-2-063-01-03-02-02-16014.02.2001-1-16169.02.2001-1-04-2-1-122659-05 Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 keyA/A
©2025 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale