030-0850 Flush Mounted Paddle Handle

This flush paddle was designed for medium to heavy-duty on-highway vehicle entrance doors and features robust construction, a lock detail that allows for power locking and is compliant to FMVSS 206 (ECE R11). It incorporates the basic materials and concept used in the 030-0800 Flush Mounted Paddle Handle.

Available 

  • Optional gasket for flange of housing is available to provide resistance to water and dirt infiltration
  • Keyed random. TM201-TM250
  • Keyed alike
  • KeyOne Plus

Material
  • Housing and paddle: zinc die cast alloy
  • Pivot components: zinc plated, mild steel
  • Bushing for paddle axle and thrust washers for pivot plate: Nylon 6/6

Finish
  • Black powder coated
  • Copper-nickel-nickel-chrome plated
  • Combination black powder coated housing and chrome paddle

Installation

  • Either handed version can be installed in a wide range of locations in door - either horizontal or vertical orientation

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Applications of this product may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified with the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

030-0850 Flush Mounted Paddle Handle

  • Agricultural Tractor / Combine

    Exterior Personnel Doors


  • Armored Vehicle

    Exterior Personnel Doors

    Rear Doors


  • Bus / Motorcoach / Mass Transit

    Exterior Personnel Doors


  • Construction - Heavy Earthmoving

    Exterior Personnel Doors


  • Construction - Lifting and Material Handling

    Exterior Personnel Doors


  • Construction - Light Earthmoving

    Exterior Personnel Doors


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Exterior Personnel Doors


  • Heavy Truck / Sleeper Cabs

    Exterior Personnel Doors


  • Motor Homes

    Exterior Personnel Doors


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Personnel Doors


  • Trailers - Ranch / Farm / Cargo / Utility

    Exterior Personnel Doors


  • Travel Trailer / 5th Wheel

    Exterior Personnel Doors


Please specify search criteria:

 

  • Handing :

 

  • Finish :

 

  • Key Type (Head Configuration) :

 

  • Key Type (Color) :

 

  • Key Type (Logo) :

 

  • Keying :

 

  • Keying (Lock Cylinder Part Number) :

 

  • Keying (Keys Supplied) :

 

  • Keying (Key Part Number) :

 

  • Keying (Number of Keys per PN) :

 

  • Pivot Plate :

 

  • Lock Cam :

 

  • Collars :

CompareCatalog NumberTriMark NumberHandingFinishKey Type (Head Configuration)Key Type (Color)Key Type (Logo)KeyingKeying (Lock Cylinder Part Number)Keying (Keys Supplied)Keying (Key Part Number)Keying (Number of Keys per PN)Pivot PlateLock CamCollarsStatus CodeSample RequestCAD Drawing
0300850-1-037-00-00-00-02-16014.02.1022-0-0-0-1259702-1714101-0-1-236614-03 Right Hand Low Gloss Black No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS No NA 0 keys 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-037-00-00-00-02-16014.02.2002-0-0-0-1492702-1714101-0-1-218481-05 Right Hand Low Gloss Black No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS2002,NO KEYS No NA 0 keys 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (4 holes) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-037-00-00-00-09-0-0-0-0-3050701-2364501-0-1-231141-04 Right Hand Low Gloss Black No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, with plug NA No NA 0 keys 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Right Hand) NoneA/A
0300850-1-037-00-00-00-16-0-0-0-0-1259704-1714101-0-1-218881-04 Right Hand Low Gloss Black No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, without plug NA No NA 0 keys 4-Point, Dia .250 (6.3mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-037-01-03-02-02-16014.02.1022-1-16169.02.1022-1-1259702-1714101-0-1-223686-01 Right Hand Low Gloss Black Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-037-01-03-02-02-16014.02.1022-1-16169.02.1022-1-1259704-1714101-0-1-223686-02 Right Hand Low Gloss Black Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 4-Point, Dia .250 (6.3mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-037-01-03-02-02-16014.02.1022-1-16169.02.1022-1-2788101-1714101-0-1-123686-08 Right Hand Low Gloss Black Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 3-Point, Dia .237 (6.0mm) / Zinc (ES-104) Weldment 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-037-02-03-02-02-16014.02.1022-1-14472.02.1002-1-1259702-1714101-0-1-236614-02 Right Hand Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP,KS900,CH751 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-037-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1259702-1714101-0-1-236614-04 Right Hand Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-037-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-3050701-2364501-0-1-231141-03 Right Hand Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Right Hand) NoneA/A
0300850-1-037-02-03-02-02-91900.0751.0000-1-14472.02.1002-1-1259702-2170501-0-1-236614-01 Right Hand Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS900,CH751,NM,0 Yes KEY,BTD,CORP,KS900,CH751 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Right Hand) NoneA/A
0300850-1-037-04-02-01-02-91210.0250.0000-1-20717.01-1-1259702-2364201-0-1-223699-04 Right Hand Low Gloss Black Small Rectangular Head Nickel finish, no overmold or cap Blank logo Non-master keyed/keyed alike LKCYL,TD,KS210,D250,NM,0 Yes KEY,BTD,CORP,KS210,D250 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .236 (5.9mm) NoneA/A
0300850-1-063-00-00-00-02-16014.02.1022-0-0-0-1492702-1714101-0-1-218481-10 Right Hand Copper-Nickel Nickel Chrome No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS No NA 0 keys 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (4 holes) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-063-00-00-00-02-16014.02.1030-0-0-0-1492704-2496501-0-6-225328-01 Right Hand Copper-Nickel Nickel Chrome No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS101,NO KEYS No NA 0 keys 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (5 holes) 1-Point Lock Cam, Dia .250 (6.3mm) NoneA/A
0300850-1-063-00-00-00-16-0-0-0-0-1259702-1714101-0-1-218881-01 Right Hand Copper-Nickel Nickel Chrome No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, without plug NA No NA 0 keys 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-063-00-00-00-16-0-0-0-0-1259702-2364201-0-1-223699-03 Right Hand Copper-Nickel Nickel Chrome No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, without plug NA No NA 0 keys 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .236 (5.9mm) NoneA/A
0300850-1-063-00-00-00-16-0-0-0-0-3050701-2364501-0-1-231141-02 Right Hand Copper-Nickel Nickel Chrome No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, without plug NA No NA 0 keys 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Right Hand) NoneA/A
0300850-1-063-01-03-02-02-16014.02.1022-1-16169.02.1022-1-1953201-1714101-0-1-223702-01 Right Hand Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-063-01-03-02-02-16014.02.1022-1-16169.02.1022-1-1953201-2364301-0-1-223694-01 Right Hand Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-063-01-03-02-02-16014.02.1022-1-16169.02.1022-1-8169302-2364401-0-1-223688-01 Right Hand Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-063-01-03-02-02-16014.02.1041-1-16169.02.1041-1-8169302-2364101-1-1-223690-02 Right Hand Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1041,NO KEYS Yes KEY,BTD,CORP,KS101,1041,BLACK 1 key 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) Collar On Lock Cam Only A/RU
0300850-1-063-01-03-02-02-16014.02.2002-1-16169.02.2002-1-1259702-1714101-0-1-236614-07 Right Hand Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS2002,NO KEYS Yes KEY,BTD,CORP,KS201,2002,BLACK 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1259702-1714101-0-1-236614-09 Right Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1259702-2364101-1-1-239356-01 Right Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) Collar On Lock Cam OnlyA/A
0300850-1-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1259702-2364201-0-1-223699-01 Right Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .236 (5.9mm) NoneA/A
0300850-1-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1259702-2364601-1-1-223692-01 Right Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Left Hand) Collar On Lock Cam Only A/RU
0300850-1-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1953201-2364301-0-1-223694-02 Right Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-3050701-2364501-0-1-231141-01 Right Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Right Hand) None A/CP
0300850-1-063-02-03-02-02-91900.0751.0000-1-14472.02.1003-2-1259701-2364601-0-7-223695-01 Right Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS900,CH751,NM,0 Yes KEY,SET,BTD,CORP,KS900,CH751 2 keys on ring 4-Point, Dia .237 (6.0mm) / Zinc (ES-104) 2-Point Lock Cam, Dia .237 (6.0mm) (Left Hand) NoneA/A
0300850-1-063-02-03-02-02-91900.0751.0000-1-14472.02.1003-2-1259704-1714101-0-1-223686-06 Right Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS900,CH751,NM,0 Yes KEY,SET,BTD,CORP,KS900,CH751 2 keys on ring 4-Point, Dia .250 (6.3mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-063-02-03-02-02-91930.1250.0000-1-14472.92.9009-1-1259702-1714101-0-1-236614-08 Right Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Master keyed/keyed random LKCYL,TD,KS930,1250,NM,0 Yes KEY,BTD,CORP,KS930,1250 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-063-02-03-02-02-91930.1250.0000-1-14472.92.9009-1-1259702-2364201-0-1-223699-02 Right Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS930,1250,NM,0 Yes KEY,BTD,CORP,KS930,1250 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .236 (5.9mm) NoneA/A
0300850-1-063P-01-03-02-02-16014.02.2001-1-16169.02.2001-1-1259704-1714101-0-1-223686-15 Right Hand Copper-Nickel Nickel Chrome (Premium quality) (12569-01 hsg) Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 key 4-Point, Dia .250 (6.3mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-099-00-00-00-16-0-0-0-0-1259702-1714101-0-1-218881-02 Right Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, without plug NA No NA 0 keys 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-099-01-03-02-02-16014.02.1001-1-16169.02.1001-2B-1259702-1714101-0-1-322881-01 Right Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1001,NO KEYS Yes KEY,BTD,CORP,KS101,1001,BLACK 2 keys not on ring 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-099-01-03-02-02-16014.02.1022-1-16169.02.1022-1-1492702-1714101-0-1-218481-08 Right Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (4 holes) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-1-099-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1259702-1714101-0-1-236614-06 Right Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-037-00-00-00-01-16014.01.1025-0-0-0-1953301-1714101-0-1-223701-03 Left Hand Low Gloss Black No key No key No key Master keyed/keyed alike LKCYL,TD,KS101,1025,IL,NO KEYS No NA 0 keys 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-037-00-00-00-02-16014.02.1030-0-0-0-1492604-1714101-0-6-222008-06 Left Hand Low Gloss Black No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS101,NO KEYS No NA 0 keys 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (5 holes) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-037-00-00-00-02-16014.02.1030-0-0-0-1492604-2496501-0-6-222008-05 Left Hand Low Gloss Black No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS101,NO KEYS No NA 0 keys 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (5 holes) 1-Point Lock Cam, Dia .250 (6.3mm) NoneA/A
0300850-2-037-00-00-00-02-16014.02.2002-0-0-0-1492605-1714101-0-1-218482-04 Left Hand Low Gloss Black No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS2002,NO KEYS No NA 0 keys 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (4 holes) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-037-00-00-00-09-0-0-0-0-3030001-2364601-0-1-231140-04 Left Hand Low Gloss Black No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, with plug NA No NA 0 keys 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Left Hand) NoneA/A
0300850-2-037-00-00-00-16-0-0-0-0-1265804-1714101-0-1-222614-02 Left Hand Low Gloss Black No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, without plug NA No NA 0 keys 4-Point, Dia .250 (6.3mm) / No Finish 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-037-01-03-02-02-16014.02.1022-1-16169.02.1022-1-1265802-1714101-0-1-222614-04 Left Hand Low Gloss Black Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-037-01-03-02-02-16014.02.1022-1-16169.02.1022-1-1265804-1714101-0-1-222614-03 Left Hand Low Gloss Black Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 4-Point, Dia .250 (6.3mm) / No Finish 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-037-01-03-02-02-16014.02.1022-1-16169.02.1022-1-2799601-1714101-0-1-122614-10 Left Hand Low Gloss Black Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 3-Point, Dia .237 (6.0mm) / Zinc (ES-104) Weldment 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-037-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1265802-1714101-0-1-222614-15 Left Hand Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-037-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-3030001-2364601-0-1-231140-03 Left Hand Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Left Hand) NoneA/A
0300850-2-037-02-03-02-02-91900.0751.0000-1-14472.02.1002-1-1265802-2205101-0-1-236613-01 Left Hand Low Gloss Black Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS900,CH751,NM,0 Yes KEY,BTD,CORP,KS900,CH751 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Left Hand) NoneA/A
0300850-2-037-04-02-01-02-91210.0250.0000-1-20717.01-1-1265802-2364201-0-1-223700-02 Left Hand Low Gloss Black Small Rectangular Head Nickel finish, no overmold or cap Blank logo Non-master keyed/keyed alike LKCYL,TD,KS210,D250,NM,0 Yes KEY,BTD,CORP,KS210,D250 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .236 (5.9mm) NoneA/A
0300850-2-063-00-00-00-02-16014.02.1022-0-0-0-1492605-1714101-0-1-218482-09 Left Hand Copper-Nickel Nickel Chrome No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS No NA 0 keys 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (4 holes) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-063-00-00-00-02-16014.02.1030-0-0-0-1492604-1714101-0-6-222008-01 Left Hand Copper-Nickel Nickel Chrome No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS101,NO KEYS No NA 0 keys 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (5 holes) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-063-00-00-00-02-16014.02.1030-0-0-0-1492604-2496501-0-6-222008-04 Left Hand Copper-Nickel Nickel Chrome No key No key No key Non-master keyed/keyed alike LKCYL,TD,KS101,NO KEYS No NA 0 keys 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (5 holes) 1-Point Lock Cam, Dia .250 (6.3mm) NoneA/A
0300850-2-063-00-00-00-16-0-0-0-0-1265802-2364201-0-1-223700-04 Left Hand Copper-Nickel Nickel Chrome No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, without plug NA No NA 0 keys 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .236 (5.9mm) NoneA/A
0300850-2-063-00-00-00-16-0-0-0-0-3030001-2364601-0-1-231140-02 Left Hand Copper-Nickel Nickel Chrome No key No key No key KeyOne or KeyOne Plus provision supplied without lock cylinders, without plug NA No NA 0 keys 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Left Hand) NoneA/A
0300850-2-063-01-03-02-02-16014.02.1022-1-16169.02.1022-1-1953301-1714101-0-1-223701-01 Left Hand Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-063-01-03-02-02-16014.02.1022-1-16169.02.1022-1-8169202-2364401-0-1-223689-01 Left Hand Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-063-01-03-02-02-16014.02.1041-1-16169.02.1041-1-8169202-2364101-1-1-223691-02 Left Hand Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1041,NO KEYS Yes KEY,BTD,CORP,KS101,1041,BLACK 1 key 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) Collar On Lock Cam Only A/RU
0300850-2-063-01-03-02-02-16014.02.2002-1-16169.02.2002-1-1265802-1714101-0-1-222614-05 Left Hand Copper-Nickel Nickel Chrome Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS2002,NO KEYS Yes KEY,BTD,CORP,KS201,2002,BLACK 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1265802-1714101-0-1-222614-13 Left Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1265802-2364101-1-1-239357-01 Left Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) Collar On Lock Cam OnlyA/A
0300850-2-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1265802-2364201-0-1-223700-01 Left Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .236 (5.9mm) NoneA/A
0300850-2-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1265802-2364501-1-1-223693-01 Left Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Right Hand) Collar On Lock Cam Only A/RU
0300850-2-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1492604-1714101-0-6-222008-03 Left Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (5 holes) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1953301-1714101-0-1-223701-02 Left Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-063-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-3030001-2364601-0-1-231140-01 Left Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 1-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Left Hand) NoneA/A
0300850-2-063-02-03-02-02-91900.0751.0000-1-14472.02.1003-2-1265802-2364501-0-7-223696-01 Left Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS900,CH751,NM,0 Yes KEY,SET,BTD,CORP,KS900,CH751 2 keys on ring 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 2-Point Lock Cam, Dia .237 (6.0mm) (Right Hand) NoneA/A
0300850-2-063-02-03-02-02-91900.0751.0000-1-14472.02.1003-2-1265804-1714101-0-1-222614-07 Left Hand Copper-Nickel Nickel Chrome Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS900,CH751,NM,0 Yes KEY,SET,BTD,CORP,KS900,CH751 2 keys on ring 4-Point, Dia .250 (6.3mm) / No Finish 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-063P-01-03-02-02-16014.02.2001-1-16169.02.2001-1-1265804-1714101-0-1-222614-11 Left Hand Copper-Nickel Nickel Chrome (Premium quality) (12569-01 hsg) Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS201,2001,NO KEYS Yes KEY,BTD,CORP,KS201,2001,BLACK 1 key 4-Point, Dia .250 (6.3mm) / No Finish 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-099-01-03-02-02-16014.02.1001-1-16169.02.1001-2B-1259702-1714101-0-1-236614-05 Left Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1001,NO KEYS Yes KEY,BTD,CORP,KS101,1001,BLACK 2 keys not on ring 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-099-01-03-02-02-16014.02.1001-1-16169.02.1001-2B-1265802-1714101-0-1-222614-01 Left Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1001,NO KEYS Yes KEY,BTD,CORP,KS101,1001,BLACK 2 keys not on ring 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-099-01-03-02-02-16014.02.1022-1-16169.02.1022-1-1492605-1714101-0-1-218482-06 Left Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Large Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS101,1022,NO KEYS Yes KEY,BTD,CORP.KS101,1022,BLACK 1 key 4-Point, Dia .265 (6.7mm) / Nitrotec (ES-111) (4 holes) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
0300850-2-099-02-03-02-02-91200.0202.0000-1-14264.01.1043-1-1265802-1714101-0-1-222614-14 Left Hand Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle Small Round Head Black overmold TriMark logo Non-master keyed/keyed alike LKCYL,TD,KS200,TM202,NM,0 Yes KEY,BTD,CORP,KS200,T202 1 key 4-Point, Dia .237 (6.0mm) / Nitrotec (ES-111) 1-Point Lock Cam, Dia .237 (6.0mm) NoneA/A
©2025 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale