Designed For

Medium to heavy duty doors of 23-91 kg (50-200 lbs.) with door seal pressures of 23-60 kg (50-150 lbs.)
Use with TriMark 070-0201 Striker Bolt

Features/Benefits

Heavy duty modular construction -- survives in punishing environments
Can be used on retrofit or new surface mount vehicle construction
.550" (13.9mm) diameter striker bolt

Available

Right or left hand configurations (left hand shown)
Custom configured release levers
Other mount options (please inquire)
Heavy duty latch/striker provides rotor/cam assist to heavy doors, hinges and compensates for door sag

Material

Case halves: high strength steel
Springs: non-corrosive stainless steel
Rotor and catch: heat treated high strength steel with dry lube coating

Finish

Standard: RoHS compliant zinc plated, clear chromate steel components
Optional: powder coated or CARC finish in custom colors

Installation

(3) M8 x 1.25 class 8.8 or 5/16-18 UNC grade 8 or better fasteners are recommended (not included)
Tighten to the manufacturers' recommended torque value

Patent Pending

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Caution: Applications of this latch may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified within the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested with approved TriMark Striker Bolts in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) load requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-1600 TriGuard Heavy Duty Single Rotor Latch

Agricultural Tractor / Combine
Engine Compartments / Hoods
Armored Vehicle
Exterior Personnel Doors
Interior Personnel Doors
Rear Doors
Systems
Construction - Heavy Earthmoving
Access Panels
Engine Compartments / Hoods
Exterior Personnel Doors
Construction - Lifting and Material Handling
Access Panels
Engine Compartments / Hoods
Exterior Personnel Doors
Construction - Light Earthmoving
Access Panels
Engine Compartments / Hoods
Exterior Personnel Doors
Industrial Enclosure/Cabinet
Access Panels/Cabinet Doors
Exterior Storage Compartments

Please specify search criteria:

Compare	Catalog Number	TriMark Number	Description	Status Code	Sample Request	CAD Drawing
	0501600-101503-28810-32341-1	32360-01	Right Hand,Zinc Plate/Clear Chromate,.326 (8.3mm) Diameter Through,Flat cam,Non-handed,1.25 (31.8mm),No holes,L-Shaped,Non-Handed,2 Holes,1.65 x .38 x .30 DIA Hole,2.32 x .40 x .27 DIA Hole,(41.9 mm x 9.7 mm x 7.6 mm Dia Hole, 58.9 mm x 10.2 mm x 6.9 mm Dia Hole),Pins	A/A
	0501600-101503-28810-32341-4	32360-02	Right Hand,Zinc Plate/Clear Chromate,.326 (8.3mm) Diameter Through,Flat cam,Non-handed,1.25 (31.8mm),No holes,L-Shaped,Non-Handed,2 Holes,1.65 x .38 x .30 DIA Hole,2.32 x .40 x .27 DIA Hole,(41.9 mm x 9.7 mm x 7.6 mm Dia Hole, 58.9 mm x 10.2 mm x 6.9 mm Dia Hole),Pins + Export Label	A/A
	0501600-101503-28964-00000-0	28962-02	Right Hand,Zinc Plate/Clear Chromate,.326 (8.3mm) Diameter Through,2-Lobes,Non-handed,1.06 x .12 x .92 x .13 x .25 DIA Holes,(26.9 mm x 3.0 mm x 23.4 mm x 3.3 mm x 6.4 mm Dia),NA,NA	A/A
	0501600-201503-28810-32341-1	32359-01	Left Hand,Zinc Plate/Clear Chromate,.326 (8.3mm) Diameter Through,Flat cam,Non-handed,1.25 (31.8mm),No holes,L-Shaped,Non-Handed,2 Holes,1.65 x .38 x .30 DIA Hole,2.32 x .40 x .27 DIA Hole,(41.9 mm x 9.7 mm x 7.6 mm Dia Hole, 58.9 mm x 10.2 mm x 6.9 mm Dia Hole),Pins	A/A
	0501600-201503-28810-32341-4	32359-02	Left Hand,Zinc Plate/Clear Chromate,.326 (8.3mm) Diameter Through,Flat cam,Non-handed,1.25 (31.8mm),No holes,L-Shaped,Non-Handed,2 Holes,1.65 x .38 x .30 DIA Hole,2.32 x .40 x .27 DIA Hole,(41.9 mm x 9.7 mm x 7.6 mm Dia Hole, 58.9 mm x 10.2 mm x 6.9 mm Dia Hole),Pins + Export Label	A/A
	0501600-201503-28964-00000-0	28961-02	Left Hand,Zinc Plate/Clear Chromate,.326 (8.3mm) Diameter Through,2-Lobes,Non-handed,1.06 x .12 x .92 x .13 x .25 DIA Holes,(26.9 mm x 3.0 mm x 23.4 mm x 3.3 mm x 6.4 mm Dia),NA,NA	A/A
	0501600-201503-28964-00000-3	28961-01	Left Hand,Zinc Plate/Clear Chromate,.326 (8.3mm) Diameter Through,2-Lobes,Non-handed,1.06 x .12 x .92 x .13 x .25 DIA Holes,(26.9 mm x 3.0 mm x 23.4 mm x 3.3 mm x 6.4 mm Dia),NA,Export Label	A/A