050-0107 Two Rotor Latch With Coaxial Trip

This two rotor latch is a sub-platform to the TriMark proven 050-0100 series latch and is designed for medium to heavy-duty applications for on or off highway entrance doors, compartments and access panels. It features a coaxial trip mechanism for applications where it is desirable to provide additional support to the trip lever and is FMVSS 206 (ECE R11) compliant.

 

 

DESIGNED FOR:

  • Medium to heavy weight doors for on or off-highway vehicle applications
  • Door thicknesses of 1-7/8" or greater (47.6 mm)
  • Door weights of 50-200 lbs. (23-91 kg)
  • Door seal pressures of 50-150 lbs. (23-68 kg) (suggested for best results)
  • Applications where it is desirable to provide additional support to the trip lever
  • Use with TriMark 070-0200 Striker Bolt

AVAILABLE:

  • In left or right hand configurations
  • With (4) 1/4-20 UNC, M6 x 1 threaded axles or .286" (7.3mm) diameter "thru" axles
  • With trip lever options (please inquire)
  • With a torsion return spring

MATERIAL:

  • Internal latch components: heat treated, smooth edge stamped steel
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel

FINISH:

  • Zinc plated, clear chromate steel components

INSTALLATION:

  • (4) 1/4-20 UNC grade 5 or M6 x 1 class 8.8 or better fasteners are required (not included).
  • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs (13.3 N-m)
  • Fastener mounting holes diameter should not exceed .281" (7.1mm)

INTERNAL LUBRICATION:

  • Oven-cured dry lubricant is applied at factory on all critical moving parts  

Applications of this latch may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified within the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested with approved TriMark Striker Bolts in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) load requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0107 Two Rotor Latch With Coaxial Trip

  • Agricultural Tractor / Combine

    Access Panels

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Personnel Doors


  • Bus / Motorcoach / Mass Transit

    Exterior Personnel Doors


  • Construction - Heavy Earthmoving

    Access Panels

    Door Hold Open

    Exterior Personnel Doors

    Exterior Storage Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Exterior Storage Compartments

    Interior Personnel Doors


  • Construction - Light Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Personnel Doors

    Interior Personnel Doors


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Exterior Personnel Doors


  • Heavy Truck / Sleeper Cabs

    Exterior Personnel Doors


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Engine Compartments / Hoods

    Exterior Personnel Doors


Please specify search criteria:


CompareCatalog NumberTriMark NumberHandingMountingActuationKnob OptionActuation FeatureSecondary ActuationStatus CodeSample RequestCAD Drawing
0500107-101-17305-21-2190017307-01 Right Hand 1/4-20 UNC Threaded Axles Finger Release, Right Hand Coaxial Actuator Two Knobs Torsion Spring Push, LH, 2.28 LongA/A
0500107-101-34221-01-0000034223-01 Right Hand 1/4-20 UNC Threaded Axles Conventional 3 point L-Shaped, Right Hand Coaxial Actuator None Torsion Spring NoneA/A
0500107-101-36047-02-0000036048-01 Right Hand 1/4-20 UNC Threaded Axles Right Hand, Coaxial, Angled, 65.0mm X 28.6 None Extension Spring NoneA/A
0500107-106-16526-11-2189916527-01 Right Hand M6 X 1.0 Threaded Axles Conventional Straight, Right Hand Coaxial Actuator, 2.000 One Knob Torsion Spring Push, RH, 2.28 LongA/A
0500107-106-20245-00-0000020246-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Reverse Actuation, Right Hand, 5.75 None No Actuation Feature NoneA/A
0500107-106-20396-01-1128033153-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Spoon, Dipped None Torsion Spring Conventional Straight, 1 Point, 1.11 X 20 DegA/A
0500107-106-22746-01-2276425631-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Right Hand Coaxial Actuator, Dipped None Torsion Spring Lever,Trip,Internal,Right Hand,.24 x .236 SlotA/A
0500107-106-24799-01-2191424800-01 Right Hand M6 X 1.0 Threaded Axles Conventional, Straight, Right Hand Coaxial Actuator, 3.62 Long None Torsion Spring Pull, RH, Straight, 1.82 Long, SlotA/A
0500107-106-25705-02-2569925701-01 Right Hand M6 X 1.0 Threaded Axles LVR,TRIP,.205 HOLE None Extension Spring Lever, Trip, Coaxial, Right Hand, .205 HoleA/A
0500107-106-31309-11-3148631504-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, Straight, Right Handed, 123mm X 45mm One Knob Torsion Spring Pull, Non-handed, 76mm x 57mmA/A
0500107-106-32748-11-2191332747-01 Right Hand M6 X 1.0 Threaded Axles Finger Release, L-Shaped, Right Hand Coaxial Actuator One Knob Torsion Spring Direct Release L-Shaped, Right Hand Actuator, .89 X .45 (22.6mm X 11.4mm), Form, SlotA/A
0500107-106-35677-01-2320535680-01 Right Hand M6 X 1.0 Threaded Axles Conventional, Straight, Left Hand Coaxial Actuator, 3.62 Long None Torsion Spring Pull, LH, Straight, .97 LongA/A
0500107-201-17306-21-2189714913-01 Left Hand 1/4-20 UNC Threaded Axles Finger Release, Left Hand Coaxial Actuator Two Knobs Torsion Spring Push, RH, 2.28 LongA/A
0500107-201-26857-01-1111126858-01 Left Hand 1/4-20 UNC Threaded Axles LVR,TRIP,COAX,LH,OFS,.276 HOLE None Torsion Spring NoneA/A
0500107-206-18201-11-2190918573-01 Left Hand M6 X 1.0 Threaded Axles Conventional Straight, Left Hand Coaxial Actuator, 2.000 One Knob Torsion Spring Push, RH, 1.84 LongA/A
0500107-206-18201-21-0000034937-01 Left Hand M6 X 1.0 Threaded Axles Conventional Straight, Left Hand Coaxial Actuator, 2.000 Two Knobs Torsion Spring NoneA/A
0500107-206-18201-21-2136821376-01 Left Hand M6 X 1.0 Threaded Axles Conventional Straight, Left Hand Coaxial Actuator, 2.000 Two Knobs Torsion Spring Pull, CatchA/A
0500107-206-22745-01-2276325632-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Coaxial Actuator, Dipped None Torsion Spring Pull, RH, StraightA/A
0500107-206-23487-01-1128023651-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Right Hand Coaxial Actuator, 4.00 Long, Dipped None Torsion Spring Conventional Straight, 1 Point, 1.11 X 20 DegA/A
0500107-206-25684-02-2127425683-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Left Hand Coaxial Actuator None Extension Spring Pull, RH, Angled 15 DegA/A
0500107-206-29191-01-2191524802-01 Left Hand M6 X 1.0 Threaded Axles Conventional, Straight, Left Hand Coaxial Actuator, 3.62 Long None Torsion Spring Pull, LH, Straight, 1.82 Long, SlotA/A
0500107-206-30430-11-2950429374-01 Left Hand M6 X 1.0 Threaded Axles LVR,TRIP,COAX,LH One Knob Torsion Spring Lever, Trip, Internal, Offset, Left Hand, .238 x .299 SlotA/A
0500107-206-31244-11-3148631488-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, Straight, Left Handed, 123mm X 45mm One Knob Torsion Spring Pull, Non-handed, 76mm x 57mmA/A
0500107-206-32857-11-2191932856-01 Left Hand M6 X 1.0 Threaded Axles Finger Release, L-Shaped, Left Hand Coaxial Actuator One Knob Torsion Spring Direct Release L-Shaped, Left Hand Actuator, .89 X .45 (22.6mm X 11.4mm), Form, SlotA/A
0500107-206-35679-01-2320635678-01 Left Hand M6 X 1.0 Threaded Axles Conventional, Straight, Right Hand Coaxial Actuator, 3.62 Long None Torsion Spring Pull, RH, Straight, .97 LongA/A
©2018 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale