050-0103 Two Rotor Latch Two Position Intertrip

This two rotor latch is a sub-platform to the TriMark proven 050-0100 series latch and is designed for medium to heavy-duty applications for on or off highway compartments and access panels. It features an internal trip mechanism for applications where it is desirable to have the release mechanism in-line with the latch.

DESIGNED FOR:

  • Medium to heavy weight doors for on or off-highway applications
  • Door thicknesses of 1-7/8" or greater (47.6mm)
  • Door weights of 50-200 lbs. (23-91 kg)
  • Door seal pressures of 50-150 lbs. (23-68 kg)(suggested for best results)
  • Visible surface installation or concealed inside installation
  • Applications where it is desirable to have the release mechanism in-line with the latch

AVAILABLE:

  • In left or right hand configurations
  • With (4) 1/4-20 UNC, M6 x 1 threaded axles
  • With trip lever options

FINISH:

  • Zinc plated, clear chromate steel components

MATERIAL:

  • Internal latch components: heat treated, smooth edge stamped steel
  • Case halves: high strength steel
  • Springs: non-corrosive stainless steel

INSTALLATION:

  • (4) 1/4-20 UNC grade 5 or M6 x 1 class 8.8 or better fasteners are required (not included).
  • Tighten to the fastener manufacturers' recommended torque value, however, do not exceed 120 in-lbs. (13.3 N-m)
  • Fastener mounting holes diameter should not exceed .281" (7.1 mm)

INTERNAL LUBRICATION:

  • Oven-cured dry lubricant is applied at factory on all critical moving parts

NOTE: Two position, double rotor latches comply with FMVSS 206 (ECE R11) in primary and secondary latching positions when installed as shown below and tested with approved TriMark FMVSS 206 (ECE R11) compliant striker bolts in accordance with SAE J839.

Individual part dimensions are for reference only. Refer to individual part drawings for complete dimensions, specifications, and installation procedures. Engineering assistance and application drawings are available.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

050-0103 Two Rotor Latch Two Position Intertrip

  • Agricultural Tractor / Combine

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Bus / Motorcoach / Mass Transit

    Access Panels

    Exterior Storage Compartments


  • Construction - Heavy Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Lifting and Material Handling

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods

    Exterior Storage Compartments


  • Construction - Light Earthmoving

    Access Panels

    Door Hold Open

    Engine Compartments / Hoods


  • Fire / Rescue / Ambulance / Emergency Vehicle

    Access Panels

    Exterior Storage Compartments


  • Heavy Truck / Sleeper Cabs

    Baggage Doors

    Engine Compartments / Hoods

    Exterior Storage Compartments

    Tool Boxes


  • Industrial Enclosure/Cabinet

    Access Panels/Cabinet Doors

    Exterior Storage Compartments


  • Motor Homes

    Baggage Doors

    Engine Compartments / Hoods


  • Pick-up Truck - Tool Boxes / Topper / Tonneau

    Tool Boxes


  • Replicars / Kit Cars

    Engine Compartments / Hoods


  • Step Van / Walk-in Vans / Delivery Vehicle

    Exterior Storage Compartments

    Tool Boxes


  • Trailers - Ranch / Farm / Cargo / Utility

    Access Panels

    Exterior Storage Compartments


  • Travel Trailer / 5th Wheel

    Baggage Doors


  • Utility Bodies / Wreckers / Specialty Truck

    Exterior Storage Compartments

    Tool Boxes


Please specify search criteria:


CompareCatalog NumberTriMark NumberHandingMountingActuationExternal ActuationCatch SpringInternal Trip Lever SpringLatch Plate CutoutsStatus CodeCAD Drawing
0500103-1-01-1156216CTHD-0000000000-01-00-0120528-01 Right Hand 1/4-20 UNC Threaded Axles Threaded end on catch, Threaded 1/4-20 (11562-16) None Normal Duty Catch Spring None Front plate edge cutoutA/A
0500103-1-01-2190601LVRR-0000000000-01-01-0817704-01 Right Hand 1/4-20 UNC Threaded Axles Lever release (21906-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and small end cutoutsA/A
0500103-1-01-2190801LVRR-0000000000-01-01-0818136-01 Right Hand 1/4-20 UNC Threaded Axles Lever release (21908-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and small end cutoutsA/A
0500103-1-01-2362501LVRR-0000000000-01-01-0823626-01 Right Hand 1/4-20 UNC Threaded Axles Lever release (23625-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and small end cutoutsA/A
0500103-1-01-2490901LVRR-0000000000-01-01-0824910-01 Right Hand 1/4-20 UNC Threaded Axles Lever release (24909-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and small end cutoutsA/A
0500103-1-01-8111016CNTD-0000000000-01-00-0314800-01 Right Hand 1/4-20 UNC Threaded Axles Catch release (81110-16) None Normal Duty Catch Spring None Front plate end cutoutA/A
0500103-1-02-1256716CTHD-0000000000-01-00-0112611-01 Right Hand .286 (7.3mm) Through Axles Threaded end on catch, Threaded M6X1 (12567-16) None Normal Duty Catch Spring None Front plate edge cutoutA/A
0500103-1-02-3433301VLHL-0000000000-01-01-1034326-01 Right Hand .286 (7.3mm) Through Axles Lever release, .265" (6.73mm) hole (34326-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-1-02-8106916CNTD-0000000000-01-00-0311551-16 Right Hand .286 (7.3mm) Through Axles Catch release (81069-16) None Normal Duty Catch Spring None Front plate end cutoutA/A
0500103-1-02-8111016CNTD-0000000000-01-00-0313899-01 Right Hand .286 (7.3mm) Through Axles Catch release (81110-16) None Normal Duty Catch Spring None Front plate end cutoutA/A
0500103-1-02-8111016CNTD-0000000000-02-00-0322044-01 Right Hand .286 (7.3mm) Through Axles Catch release (81110-16) None Heavy Duty Catch Spring None Front plate end cutoutA/A
0500103-1-02-8193126CESR-0000000000-01-00-0112563-16 Right Hand .286 (7.3mm) Through Axles Catch release with extension spring return (81931-26) None Normal Duty Catch Spring None Front plate edge cutoutA/A
0500103-1-06-1256716CTHD-0000000000-01-00-0115276-01 Right Hand M6 X 1.0 Threaded Axles Threaded end on catch, Threaded M6X1 (12567-16) None Normal Duty Catch Spring None Front plate edge cutoutA/A
0500103-1-06-1945501CNTD-0000000000-02-00-0119606-01 Right Hand M6 X 1.0 Threaded Axles Catch release (19445-01) None Heavy Duty Catch Spring None Front plate edge cutoutA/A
0500103-1-06-2083601CWPR-0000000000-01-00-1520578-01 Right Hand M6 X 1.0 Threaded AxlesCatch with post release (20836-01) None Normal Duty Catch Spring None Back plate end and catch post cutoutsA/A
0500103-1-06-2083601CWPR-2083201TTH-01-00-1620833-01 Right Hand M6 X 1.0 Threaded AxlesCatch with post release (20836-01) External trip lever release with torsion spring, .204 (5.18mm) hole (20832-01) Normal Duty Catch Spring None Back plate catch post cutoutA/A
0500103-1-06-2083601CWPR-8073716TTS-01-00-1633012-01 Right Hand M6 X 1.0 Threaded AxlesCatch with post release (20836-01) External trip lever with torsion spring, .26" (6.5mm) hole (80736-16) Normal Duty Catch Spring None Back plate catch post cutoutA/A
0500103-1-06-2098701LVR-0000000000-01-03-0620278-01 Right Hand M6 X 1.0 Threaded Axles Lever release (20987-01) None Normal Duty Catch Spring High Stress Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-1-06-2107301LVSL-3151101TLH-01-01-0631512-01 Right Hand M6 X 1.0 Threaded Axles Lever release, .150" (3.81mm)R/.225"(5.71mm)R X .600" (15.2mm) slot (21073-01) External trip lever release, .295" (7.5mm) hole (31511-01) Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-1-06-2189501LVHL-0000000000-01-01-0520110-01 Right Hand M6 X 1.0 Threaded Axles Lever release, .204" (5.18mm) hole (14498-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge cutoutA/A
0500103-1-06-2189501LVHL-0000000000-01-01-1014498-01 Right Hand M6 X 1.0 Threaded Axles Lever release, .204" (5.18mm) hole (14498-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-1-06-2190601LVRR-0000000000-01-01-0820360-01 Right Hand M6 X 1.0 Threaded Axles Lever release (21906-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and small end cutoutsA/A
0500103-1-06-2191001LVRR-0000000000-01-00-1319122-01 Right Hand M6 X 1.0 Threaded Axles Lever release (21910-01) None Normal Duty Catch Spring None Back plate small edge cutoutA/A
0500103-1-06-2191201LVRR-0000000000-01-01-0619586-01 Right Hand M6 X 1.0 Threaded Axles Lever release (21912-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-1-06-2191301LVSL-2412501TLH-01-01-1324126-01 Right Hand M6 X 1.0 Threaded Axles Lever release, .238" (6.04mm) X .300" (7.62mm) slot (21913-01) External trip lever release, .16" (4.1mm) hole (24125-01) Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate small edge cutoutA/A
0500103-1-06-2191401LVSL-2032801TRC-01-01-0621956-01 Right Hand M6 X 1.0 Threaded Axles Lever release, 38" (9.6mm) X .39" (9.9mm) slot (21914-01) External trip lever release, .120" (3.05mm) rod clip (20328-01) Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-1-06-2191401LVSL-2032801WRC-01-01-0622833-02 Right Hand M6 X 1.0 Threaded Axles Lever release, 38" (9.6mm) X .39" (9.9mm) slot (21914-01) External trip lever release with curved spring washer, .120" (3.05mm) rod clip (20328-01) Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-1-06-2191901LVSL-2032801TRC-01-01-1322835-02 Right Hand M6 X 1.0 Threaded Axles Lever release, .238" (6.04mm) X .300" (7.62mm) slot (21919-01) External trip lever release, .120" (3.05mm) rod clip (20328-01) Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate small edge cutoutA/A
0500103-1-06-2220001LVSL-2219901TTH-01-01-0621866-01 Right Hand M6 X 1.0 Threaded Axles Lever release, .37" (9.4mm) X .53" (13.5mm) slot (22200-01) External trip lever release with torsion spring, .206" (5.22mm) hole (22199-01) Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-1-06-2220001LVSL-3151101TLH-01-02-0635049-01 Right Hand M6 X 1.0 Threaded Axles Lever release, .37" (9.4mm) X .53" (13.5mm) slot (22200-01) External trip lever release, .295" (7.5mm) hole (31511-01) Normal Duty Catch Spring Heavy Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-1-06-2350001LVHL-0000000000-01-01-1023501-01 Right Hand M6 X 1.0 Threaded Axles Lever release, .204" (5.18mm) hole (23500-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-1-06-2569401LVHL-2570601CTR-02-01-0625707-01 Right Hand M6 X 1.0 Threaded Axles Lever release, .210" (5.35mm) hole (25694-01) Center release (25706-01) Heavy Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-1-06-2826201LVSL-0000000000-02-01-1228261-01 Right Hand M6 X 1.0 Threaded Axles Lever release, .37" (9.4mm) X .53" (13.5mm) slot (28262-01) None Heavy Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge and small end cutoutsA/A
0500103-1-06-2960401CNTD-0000000000-01-00-0129603-01 Right Hand M6 X 1.0 Threaded Axles Catch release (29604-01) None Normal Duty Catch Spring None Front plate edge cutoutA/A
0500103-1-06-30425.01TLES-3042501TLH-01-01-0628251-01 Right Hand M6 X 1.0 Threaded Axles Lever/ trip lever release with extension spring return, .239" (6.07mm) hole (30425-01) External trip lever release, .239" (6.07mm) hole (30425-01) Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-1-06-3282401LVSL-2032801WRC-01-01-0633167-01 Right Hand M6 X 1.0 Threaded Axles Release lever, .38" (9.6mm) X .59" (15mm) slot (32824-01) External trip lever release with curved spring washer, .120" (3.05mm) rod clip (20328-01) Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-1-06-3356601LVSH-0000000000-02-01-1233565-01 Right Hand M6 X 1.0 Threaded Axles Release lever, .37" (9.4mm) X .65" (16.5mm) slot, .200" (5.08mm) hole (33566-01) None Heavy Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge and small end cutoutsA/A
0500103-1-06-3683001LVHL-0000000000-01-01-1014498-02 Right Hand M6 X 1.0 Threaded Axles Lever release, .257" (6.53mm) hole (36830-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-1-06-37026.01RCLR -0000000000-01-01-1014498-03 Right Hand M6 X 1.0 Threaded Axles Lever release, with rod collar, .265" (6.73mm) hole (37026-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-1-06-3702601LVHL-0000000000-01-01-1014498-04 Right Hand M6 X 1.0 Threaded Axles Lever release, with rod collar, .265" (6.73mm) hole (37026-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-1-06-8063126CLCR-0000000000-01-00-1421367-01 Right Hand M6 X 1.0 Threaded Axles Catch with release through latch cutout (80631-26) None Normal Duty Catch Spring None Back plate cutout on rotor edgeA/A
0500103-1-06-8111016CNTD-0000000000-02-00-0314701-01 Right Hand M6 X 1.0 Threaded Axles Catch release (81110-16) None Heavy Duty Catch Spring None Front plate end cutoutA/A
0500103-2-01-1156216CTHD-0000000000-01-00-0112319-16 Left Hand 1/4-20 UNC Threaded Axles Threaded end on catch, Threaded 1/4-20 (11562-16) None Normal Duty Catch Spring None Front plate edge cutoutA/A
0500103-2-01-1448501CNTD-0000000000-01-00-0214486-02 Left Hand 1/4-20 UNC Threaded Axles Catch release (14485-01) None Normal Duty Catch Spring None Front plate cutout on rotor edgeA/A
0500103-2-01-2190701LVRR-0000000000-01-01-1114221-01 Left Hand 1/4-20 UNC Threaded Axles Lever release (21907-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate small end cutoutA/A
0500103-2-01-8111016CNTD-0000000000-01-00-0313166-01 Left Hand 1/4-20 UNC Threaded Axles Catch release (81110-16) None Normal Duty Catch Spring None Front plate end cutoutA/A
0500103-2-02-1256716CTHD-0000000000-01-00-0112568-16 Left Hand .286 (7.3mm) Through Axles Threaded end on catch, Threaded M6X1 (12567-16) None Normal Duty Catch Spring None Front plate edge cutoutA/A
0500103-2-02-1448501CNTD-0000000000-01-00-0220919-01 Left Hand .286 (7.3mm) Through Axles Catch release (14485-01) None Normal Duty Catch Spring None Front plate cutout on rotor edgeA/A
0500103-2-02-8111016CNTD-0000000000-01-00-0311554-16 Left Hand .286 (7.3mm) Through Axles Catch release (81110-16) None Normal Duty Catch Spring None Front plate end cutoutA/A
0500103-2-06-1156216CTHD-0000000000-02-00-0113930-01 Left Hand M6 X 1.0 Threaded Axles Threaded end on catch, Threaded 1/4-20 (11562-16) None Heavy Duty Catch Spring None Front plate edge cutoutA/A
0500103-2-06-1256716CTHD-0000000000-01-00-0113686-01 Left Hand M6 X 1.0 Threaded Axles Threaded end on catch, Threaded M6X1 (12567-16) None Normal Duty Catch Spring None Front plate edge cutoutA/A
0500103-2-06-1786201CWKB+2190201LVSL-0000000000-02-01-1817864-01 Left Hand M6 X 1.0 Threaded Axles Catch release, with knob (17862-01); Lever release, .238" (6.05mm) X .300" (7.62mm) slot (21902-01) None Heavy Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate cutout on rotor edge + Back plate small edge cutoutA/A
0500103-2-06-2083601CWPR-2083701TTH-01-00-1620834-01 Left Hand M6 X 1.0 Threaded AxlesCatch with post release (20836-01) External trip lever release with torsion spring, .204 (5.18mm) hole (20837-01) Normal Duty Catch Spring None Back plate catch post cutoutA/A
0500103-2-06-2083601CWPR-8073616TTS-01-00-1633210-01 Left Hand M6 X 1.0 Threaded AxlesCatch with post release (20836-01) External trip lever with torsion spring, .26" (6.5mm) hole (80736-16) Normal Duty Catch Spring None Back plate catch post cutoutA/A
0500103-2-06-2189601LVHL-0000000000-01-01-1014499-01 Left Hand M6 X 1.0 Threaded Axles Lever release, .204" (5.18mm) hole (21896-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-2-06-2189701LVRR-0000000000-02-01-1120130-01 Left Hand M6 X 1.0 Threaded Axles Lever release (21897-01) None Heavy Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate small end cutoutA/A
0500103-2-06-2189702LVRR-0000000000-02-01-1120130-02 Left Hand M6 X 1.0 Threaded Axles Lever release (21897-02) None Heavy Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate small end cutoutA/A
0500103-2-06-2191101LVRR-0000000000-01-01-0519585-01 Left Hand M6 X 1.0 Threaded Axles Lever release (21911-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge cutoutA/A
0500103-2-06-2191501LVSL-2032801WRC-01-01-0621476-01 Left Hand M6 X 1.0 Threaded Axles Lever release, 38" (9.6mm) X .39" (9.9mm) slot (21915-01) External trip lever release with curved spring washer, .120" (3.05mm) rod clip (20328-01) Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-2-06-2191901LVSL-2032801WRC-01-01-1322834-02 Left Hand M6 X 1.0 Threaded Axles Lever release, .238" (6.04mm) X .300" (7.62mm) slot (21919-01) External trip lever release with curved spring washer, .120" (3.05mm) rod clip (20328-01) Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate small edge cutoutA/A
0500103-2-06-2350001LVHL-0000000000-01-01-1023502-01 Left Hand M6 X 1.0 Threaded Axles Lever release, .204" (5.18mm) hole (23500-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-2-06-2569401LVHL-2570601CTR-02-01-0625708-01 Left Hand M6 X 1.0 Threaded Axles Lever release, .210" (5.35mm) hole (25694-01) Center release (25706-01) Heavy Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge cutoutA/A
0500103-2-06-2826001LVSL-0000000000-02-01-1228258-01 Left Hand M6 X 1.0 Threaded Axles Lever release, .37" (9.4mm) X .53" (13.5mm) slot (28260-01) None Heavy Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge and small end cutoutsA/A
0500103-2-06-3342901LVSL-0000000000-02-01-1233564-01 Left Hand M6 X 1.0 Threaded Axles Release lever, .37" (9.4mm) X .65" (16.5mm) slot, .200" (5.08mm) hole (33429-01) None Heavy Duty Catch Spring Normal Duty Internal Trip Lever Spring Front plate edge cutout + Back plate edge and small end cutoutsA/A
0500103-2-06-3468401LVHL-0000000000-01-01-1034683-01 Left Hand M6 X 1.0 Threaded Axles Release lever, .13" (3.3mm) hole (34684-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-2-06-3682901LVHL-0000000000-01-01-1014499-03 Left Hand M6 X 1.0 Threaded Axles Lever release, .257" (6.53mm) hole (36829-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-2-06-3702701LVHL-0000000000-01-01-1014499-02 Left Hand M6 X 1.0 Threaded Axles Lever release, .265" (6.73mm) hole (37027-01) None Normal Duty Catch Spring Normal Duty Internal Trip Lever Spring Back plate edge and end cutoutsA/A
0500103-2-06-8111016CNTD-0000000000-01-00-0316762-01 Left Hand M6 X 1.0 Threaded Axles Catch release (81110-16) None Normal Duty Catch Spring None Front plate end cutoutA/A
©2024 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale