020-1100 Remote Pull Handle

This product is designed for entrance doors on RV and specialty vehicles where it is desirable to have the exterior handle remotely mounted from the inside release and rotary latch. It features a large automotive styled exterior pull handle and latch mechanism and is adaptable for power locking.


The 020-1100 is not available for sale to the ambulance market or any patient transport vehicle until further notice.

Designed For

  • Entrance and compartment doors with thickness of 2.00" (50.8mm) minimum


  • Automotive style pull handle and latch mechanism
  • Smooth opening/closing action
  • Comfortable finger access
  • Adaptable for power door lock actuation
  • Non-handed design--the pull handle can be mounted in vertical or horizontal orientations
  • Molded gasket for flange of housing and paddle leg provides resistance to water infiltration


  • Master keyed lock key cylinder
  • Lock can be keyed to match other TriMark door products with KeyOne Plus for a single-key system, keyed alike or provided non-locking




  • Easy to install with (4) #8-32 UNC mounting screws (not included)
  • Recommended mounting torque 30 in/lbs (3.4 N-m)


  • Black powder coated housing with black powder coated paddle or chrome plated paddle
  • Optional chrome plated housing


  • Sturdy die cast zinc alloy paddle and housing
  • Molded gaskets (included)

U.S. Design Patent No. D564,855


Applications of this product may fall within the requirements of FMVSS 206 (ECE R11) and SAE J839 safety standards. These safety related requirements are dependent on door application, e.g. front and rear hinged doors, sliding doors, or hinged upward swinging doors. The entire door hardware system must be included in the design/analysis process: latch, handle, lock mechanism, cables/rods/linkages, fasteners, hinges, etc. This ensures compatibility of all components within the hardware system. If FMVSS 206 (ECE R11) is a requirement, then all of the components within the door system must comply with strength, inertia and locking requirements as specified with the Standard. Note that this product complies with FMVSS 206 (ECE R11) when tested in accordance with SAE J839 and that this product meets FMVSS 206 (ECE R11) locking requirements and may be used in FMVSS 206 (ECE R11) applications pending TriMark application approval.

Typical Uses

Typical application use illustrations are organized by Industry/System and are intended to give the user some ideas for specifying a complete system using TriMark products.

Not all Industry/System applications have typical use illustrations. If a typical use illustration is not available for your specific application, please submit a technical product information request and a technical representative can assist you in selecting a product(s) solution for your specific application.

020-1100 Remote Pull Handle

  • Bus / Motorcoach / Mass Transit

    Exterior Personnel Doors

  • Fire / Rescue / Ambulance / Emergency Vehicle

    Exterior Personnel Doors

  • Motor Homes

    Exterior Personnel Doors

  • Trailers - Ranch / Farm / Cargo / Utility

    Exterior Personnel Doors

  • Travel Trailer / 5th Wheel

    Exterior Personnel Doors

Please specify search criteria:

CompareCatalog NumberTriMark NumberDescriptionStatus CodeSample RequestCAD Drawing
0201100-3037-000000000-101223684-03Non Handed,Low Gloss Black,Non-Locking,Right Hand Pivot Actuation,No Lock Cam,With Mounting Bracket,BoxA/A
0201100-3037-700000000-210228209-02Non Handed, Low Gloss Black, KeyOne Plus provision - no lock installed, Left Hand Pivot Actuation, Standard Lock Cam, No Mounting Bracket, BoxA/A
0201100-3063-000000000-200222464-04Non Handed,Copper-Nickel Nickel Chrome,Non-Locking,Left Hand Pivot Actuation,No Lock Cam,No Mounting Bracket,BoxA/A
0201100-3063-711022000-211234197-02Non Handed,Copper-Nickel Nickel Chrome,KeyOne Plus, Master keyed/keyed alike, 1022, 0 keys,Left Hand Pivot Actuation,Standard Lock Cam,With Mounting Bracket,BoxA/A
0201100-3063-722001000-120024330-02Non Handed,Copper-Nickel Nickel Chrome,KeyOne Plus, Non-master keyed/keyed alike, 2001, 0 keys,Right Hand Pivot Actuation,Lock Cam with Power Lock Option,No Mounting Bracket,NoneA/A
0201100-3099-711022000-111222462-02Non Handed,Low Gloss Black Housing and Copper-Nickel Nickel Chrome (Duplex) Handle,KeyOne Plus, Master keyed/keyed alike, 1022, 0 keys,Right Hand Pivot Actuation,Standard Lock Cam,With Mounting Bracket,BoxA/A
©2018 TriMark Corporation. All rights reserved.     Privacy  •  Legal Info  •  Terms and Conditions of Sale